We've received your request for 200188 DI1710 (described as Conduit Assembly Me), manufactured by Dcx Chol Enterprises Inc with CAGE code 30463. This part is registered under NSN 5975-01-296-7102, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5975 Electrical Hardware and Supplies. Our verification process will confirm traceability through supporting identifiers including NIIN 01-296-7102, NCB code 01 (origin: USA), and INC 00354. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 200188 DI1710 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5975-01-296-7102 Item PartTypeName: CONDUIT ASSEMBLY,METAL,FLEXIBLE | 5975 | 012967102 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10250675-91 | 5 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRXX | MEASURING METHOD AND LENGTH | 171.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| ADAS | BODY INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNEF BOTH ENDS |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 3.500 INCHES |
| ADAR | BODY OUTSIDE DIAMETER | 1.390 INCHES NOMINAL |
| CQJX | NOMINAL THREAD SIZE | 1.437 INCHES BOTH ENDS |
| FEAT | SPECIAL FEATURES | BRASS ALLOY CONDUIT; BRASS COUPLING NUT,COLLAR AND FERRULES; RUBBER OUTER JACKET |
| SFTT | SURFACE TREATMENT | CADMIUM AND NICKEL COMPLETE END FITTING |
| AAJD | THREAD CLASS | 2B BOTH ENDS |
| ACKE | BRAIDED METALLIC SHIELD TYPE | COPPER WIRE |
| AGAV | END ITEM IDENTIFICATION | 1440-01-087-9844 LAUNCHING STATION |
| CQTX | TERMINAL END TYPE | PLAIN FERRULE W/COUPLING NUT BOTH ENDS |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,CLASS 2,TYPE II FED SPEC 1ST TREATMENT RESPONSE AND MIL-C-26074 MIL SPEC 2ND TREATMENT RESPONSE COMPLETE END FITTING |
| End Use : 20005 | Electric apparatus |
|---|---|
| Schedule B : 8547900020 (NAICS 335932) | Electrical conduit tubing lined with insulation |
| SITC : 77329 | Insulating fittings for electrical machines, appliances or equipment, of materials other than ceramics or plastics, but not including insulators |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | Q2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | Z - No rating |
| NMFC: | 060500 - Electrical equipment group |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
