Buy D-25P-3357BS Connector Plug Elec part by Deanco Inc

Part Number:  D-25P-3357BS
Alternate P/N:  D25P3357BS
Manufacturer:  deanco inc
NIIN:  012545210
Item Name :  connector plug elec
CAGE Code:  61521
INC Code:  01938
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for D-25P-3357BS (described as Connector Plug Elec), manufactured by Deanco Inc with CAGE code 61521. This part is registered under NSN 5935-01-254-5210, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 01-254-5210, NCB code 01 (origin: USA), and INC 01938. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your D-25P-3357BS requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for D-25P-3357BS

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part D-25P-3357BS, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number D-25P-3357BS with NSN 5935-01-254-5210, 5935012545210

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-01-254-5210

Item PartTypeName:

CONNECTOR,PLUG,ELECTRICAL

59350125452100PA
CIICHCCESDPMICCriticalityENAC
UAG
Part NumberISCRNVCRNCCHCCMSDSSADC
814-2523

Characteristics Data of NSN 5935-01-254-5210, 5935012545210

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2A
AAJFTHREAD DIRECTIONRIGHT-HAND
AAQLBODY STYLEHOOD,TOP OPENING W/CLAMP
ABHPOVERALL LENGTH2.073 INCHES MINIMUM AND 2.103 INCHES MAXIMUM
ABKWOVERALL HEIGHT2.472 INCHES NOMINAL
ABMKOVERALL WIDTH0.479 INCHES MINIMUM AND 0.509 INCHES MAXIMUM
AFQJCABLE ENTRANCE DIAMETER0.500 INCHES NOMINAL
AFQRTHREADED DEVICE TYPECOUPLING FACILITY
AFQWMATING END QUANTITY1
AFQXCONTACT POSITION ARRANGEMENT STYLE25 SINGLE MATING END
AFQZCONTACT REMOVABILITYREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRCCONTACT MAXIMUM CURRENT RATING IN AMPS7.5 SINGLE MATING END SINGLE CONTACT GROUPING
AFRNPOLARIZATION METHODMATING END
AFRTSHELL TYPEHOOD,TOP OPENING
AFRVCONNECTOR LOCKING METHODJACKSCREW
AFRWCONNECTOR CABLE STRAIN RELIEF METHODCOMPRESSION NUT
AWTNOPERATING TEMP RATING-55.0 DEG CELSIUS MINIMUM AND 105.0 DEG CELSIUS MAXIMUM
CMLPTHREAD QUANTITY PER INCH40
CQJXNOMINAL THREAD SIZE0.112 INCHES
CQTMTERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD SINGLE MATING END SINGLE CONTACT GROUPING
CQZGINSERT MATERIALPLASTIC SINGLE MATING END
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CSCFTERMINAL TYPECRIMP SINGLE MATING END SINGLE CONTACT GROUPING
CSGFCONTACT MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CSPTSHELL MATERIALSTEEL
CSWMSHELL SURFACE TREATMENTNICKEL
CXCGINCLUDED CONTACT QUANTITY25 SINGLE MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPEROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
HUESCOLORBLACK
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PMWTPRECIOUS MATERIAL AND WEIGHT0.025 GOLD GRAINS,TROY
PRMTPRECIOUS MATERIALGOLD
THSDTHREAD SERIES DESIGNATORUNC

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536695050 (NAICS 335931) Electrical plugs & sockets, for a voltage not exceeding 1, 000 v, nesoi
SITC : 77258 Electric plugs and sockets, for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top