Buy DX100-0302 Filter Low Pass part by Delphi Components Inc

Part Number:  DX100-0302
Alternate P/N:  DX1000302
Manufacturer:  delphi components inc
NIIN:  011227249
Item Name :  filter low pass
CAGE Code:  44523
INC Code:  13911
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for DX100-0302 (described as Filter Low Pass), manufactured by Delphi Components Inc with CAGE code 44523. This part is registered under NSN 5915-01-122-7249, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5915 Filters and Networks. Our verification process will confirm traceability through supporting identifiers including NIIN 01-122-7249, NCB code 01 (origin: USA), and INC 13911. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your DX100-0302 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for DX100-0302

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part DX100-0302, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number DX100-0302 with NSN 5915-01-122-7249, 5915011227249

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5915-01-122-7249

Item PartTypeName:

FILTER,LOW PASS

59150112272490P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
103800599595

Characteristics Data of NSN 5915-01-122-7249, 5915011227249

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH3.060 INCHES NOMINAL
ABKWOVERALL HEIGHT0.500 INCHES NOMINAL
ADAQBODY LENGTH2.300 INCHES NOMINAL
ADATBODY WIDTH1.050 INCHES NOMINAL
AEBYDISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH1.281 INCHES MAXIMUM
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.905 INCHES MAXIMUM
AFGAOPERATING TEMP RANGE-54.0 TO 71.0 DEG CELSIUS
AHAJREFERENCE FREQUENCY PER FUNCTION1.5 GIGAHERTZ BLANK
AHAUINPUT IMPEDANCE PER FUNCTION W/LOAD50.0 OHMS BLANK
AHAVOUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT50.0 OHMS BLANK
AHBNINPUT TERMINAL MANUFACTURER CODE96906
AHBPINPUT TERMINAL IDENTIFICATIONM39012/55
AHBSOUTPUT TERMINAL MANUFACTURER CODE96906
AHBTOUTPUT TERMINAL IDENTIFICATIONM39012/55
AHBZVOLTAGE STANDING WAVE RATIO PER FUNCTION1.4 BLANK
AKEJMOUNTING FACILITY SCREW THREAD SERIES DESIGNATORUNC
AKNAINCLOSURE TYPEENCASED
AXHRMOUNTING FACILITY TYPE AND QUANTITY2 TERMINAL 2ND FUNCTION
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 THREADED HOLE 1ST FUNCTION
CQDRINSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS1.3 BLANK
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 CONNECTOR,RECEPTACLE INPUT 1ST FUNCTION
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 CONNECTOR,RECEPTACLE OUTPUT 2ND FUNCTION
CQFCSPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION1.00 GIGAHERTZ BLANK AND 2.00 GIGAHERTZ BLANK AND 18.00 GIGAHERTZ BLANK AND 36.00 GIGAHERTZ BLANK
CQJXNOMINAL THREAD SIZE0.086 INCHES
CQRGBODY MATERIALMETAL
CRBBFREQUENCY BAND WIDTH PER FUNCTION1.00 GIGAHERTZ BLANK AND 2.00 GIGAHERTZ BLANK
CRBCDISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS1.3 MAXIMUM BLANK AND 30.0 MINIMUM BLANK 1ST FUNCTION
CRBNVOLTAGE STANDING WAVE RATIO FREQUENCY LIMITS PER FUNCTION1.0 GIGAHERTZ BLANK AND 2.0 GIGAHERTZ BLANK
CTJSUNPACKAGED UNIT WEIGHT7.000 OUNCES NOMINAL
STYLSTYLE DESIGNATORRECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES

Schedule B & Trade

End Use : 41210 Stereo equipment, etc.
Schedule B : 8527995030 (NAICS 334310) Reception apparatus, nesoi
SITC : 76289 Radiobroadcast receivers, not combined with sound recording or reproducing apparatus nor with a clock, etc., n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061400 - Condensers/parts noi/capacitors
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top