Buy M55339/03-00027 Adapter Connector part by Delta Electronics Inc

Part Number:  M55339/03-00027
Alternate P/N:  M55339/0300027
Manufacturer:  delta electronics inc
NIIN:  009044050
Item Name :  adapter connector
CAGE Code:  00795
INC Code:  15091
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for M55339/03-00027 (described as Adapter Connector), manufactured by Delta Electronics Inc with CAGE code 00795. This part is registered under NSN 5935-00-904-4050, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 00-904-4050, NCB code 00 (origin: USA), and INC 15091. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your M55339/03-00027 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for M55339/03-00027

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part M55339/03-00027, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number M55339/03-00027 with NSN 5935-00-904-4050, 5935009044050

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-00-904-4050

Item PartTypeName:

ADAPTER,CONNECTOR

59350090440500PA
CIICHCCESDPMICCriticalityENAC
UAG
Part NumberISCRNVCRNCCHCCMSDSSADC
042-20063-01211C

Characteristics Data of NSN 5935-00-904-4050, 5935009044050

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2A AND 2B
AAJFTHREAD DIRECTIONRIGHT-HAND
AAQLBODY STYLEANGLE SHAPE,EXTERNAL/INTERNAL COUPLING
ABHPOVERALL LENGTH1.400 INCHES NOMINAL
ABKWOVERALL HEIGHT1.300 INCHES NOMINAL
ABMKOVERALL WIDTH0.781 INCHES NOMINAL
ADZCENVIRONMENTAL PROTECTIONSALT WATER RESISTANT
AFQRTHREADED DEVICE TYPEBACK SHELL AND COUPLING FACILITY
AFQWMATING END QUANTITY2
AFQXCONTACT POSITION ARRANGEMENT STYLEN ALL MATING ENDS
AFQZCONTACT REMOVABILITYNONREMOVABLE ALL MATING ENDS ALL CONTACT GROUPINGS
AFRTSHELL TYPESOLID
AFRVCONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL AND INTERNALLY THREADED COUPLING RING
AFRYRADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 1ST MATING END ALL CONTACT GROUPINGS
AFRYRADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 2ND MATING END ALL CONTACT GROUPINGS
AGAVEND ITEM IDENTIFICATIONMRAP-M-ATV W/CS13 POP AND SNE
CQJXNOMINAL THREAD SIZE0.625 INCHES
CQTZCONTACT MATERIALCOPPER ALLOY 1ST MATING END 1ST CONTACT GROUPING
CQTZCONTACT MATERIALCOPPER ALLOY 2ND MATING END 2ND CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD ALL MATING ENDS ALL CONTACT GROUPINGS
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING
CSGFCONTACT MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533,COMP HT FED SPEC SINGLE MATERIAL RESPONSE AND QQ-B-330,COMP A FED SPEC SINGLE MATERIAL RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING
CSPTSHELL MATERIALCOPPER ALLOY
CTHHSHELL MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-613,COMP 11 FED SPEC SINGLE MATERIAL RESPONSE
CXCGINCLUDED CONTACT QUANTITY1 1ST MATING END ALL CONTACT GROUPINGS
CXCGINCLUDED CONTACT QUANTITY1 2ND MATING END ALL CONTACT GROUPINGS
CXCLINCLUDED CONTACT TYPECOAXIAL PIN 2ND MATING END 2ND CONTACT GROUPING
CXCLINCLUDED CONTACT TYPECOAXIAL SOCKET 1ST MATING END 1ST CONTACT GROUPING
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PMWTPRECIOUS MATERIAL AND WEIGHT0.010 GOLD GRAINS,TROY
PRMTPRECIOUS MATERIALGOLD
TESTTEST DATA DOCUMENT81349-MIL-PRF-55339 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLEC
THSDTHREAD SERIES DESIGNATORUNEF
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-PRF-55339/3 GOVERNMENT SPECIFICATION

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8548900100 (NAICS 335999) Electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85
SITC : 77813 Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, etc; electric parts of mach or apps, nes

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC D
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top