Buy 1949-500-450 Valve Check part by Detroit Bullet Trap Corp

Part Number: 1949-500-450

Alternate P/N: 1949500450

Manufacturer: detroit bullet trap corp

NSN: 4820-01-201-9939

NIIN: 012019939

Item Name : valve check

CAGE Code: 58388

FSC: 4820 Valves Nonpowered

INC Code: 05487

Country: USA

NCB Code: 01

FSG: 48 Valves

We've received your request for 1949-500-450 (described as Valve Check), manufactured by Detroit Bullet Trap Corp with CAGE code 58388. This part is registered under NSN 4820-01-201-9939, classified in FSG 48 Valves / FSC 4820 Valves Nonpowered. Our verification process will confirm traceability through supporting identifiers including NIIN 01-201-9939, NCB code 01 (origin: USA), and INC 05487. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 1949-500-450 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 1949-500-450

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 1949-500-450, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 1949-500-450 with NSN 4820-01-201-9939, 4820012019939

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
4820-01-201-9939 Item PartTypeName: VALVE,CHECK	4820	012019939	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1949-500-450	C	2	3

Characteristics Data of NSN 4820-01-201-9939, 4820012019939

MRC	Criteria	Characteristic
AAJF	THREAD DIRECTION	RIGHT-HAND ALL ENDS
AGAV	END ITEM IDENTIFICATION	TRACK SYSTEM,TARGET TRAINING SET;NSN 6920-01-185-9279
AHNC	CONNECTION STYLE	PLAIN,OPTIONAL END (PIPE) ALL ENDS
AQLR	VALVE OPERATION METHOD	MANUAL
BBJX	MOUNTING POSITION	HORIZONTAL
CQGM	MAXIMUM OPERATING PRESSURE	3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE
CQJX	NOMINAL THREAD SIZE	0.250 INCHES ALL ENDS
FEAT	SPECIAL FEATURES	MAX. FLOW IS 6 GPM; HOUSING IS HEXAGON CARBON STEEL; NEEDLE IS 416 STAINLESS STEEL ON STEEL AND STAINLESS STEEL VALVES; BACK-UP WASHER IS POLYTETRAFLUOROETHYLENE; BALL IS STAINLESS STEEL; POPPET IS BRASS OR STAINLESS STEEL WITH VITON(STANDA
MATT	MATERIAL	STEEL BODY LINING
STYL	STYLE DESIGNATOR	STRAIGHT THRU
SUPP	SUPPLEMENTARY FEATURES	FLOW CONTROL DEVICE: NEEDLE
THSD	THREAD SERIES DESIGNATOR	NPTF ALL ENDS

Schedule B & Trade

End Use : 21180	Industrial machines, other
Schedule B : 8481301090 (NAICS 332911)	Check valves of copper having a pressure rating of 850 kpa or over
SITC : 74730	Check valves

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	J226px-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	127220 - Pressure reg/red/relief valves noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	594 - Pumps and parts, (machinery and parts),(less than 35 feet)