Buy 850841-0401 Capacitor Fixed Plastic Dielectric part by Diamond Electronics Inc

Part Number:  850841-0401
Alternate P/N:  8508410401
Manufacturer:  diamond electronics inc
NIIN:  009247028
CAGE Code:  55819
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 850841-0401 (described as Capacitor Fixed Plastic Dielectric), manufactured by Diamond Electronics Inc with CAGE code 55819. This part is registered under NSN 5910-00-924-7028, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5910 Capacitors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-924-7028, NCB code 00 (origin: USA), and INC . Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 850841-0401 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 850841-0401

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 850841-0401, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 850841-0401 with NSN 5910-00-924-7028, 5910009247028

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5910-00-924-7028

Item Description:

CAPACITOR,FIXED,PLASTIC DIELECTR

59100092470280P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
850841-0401395

Characteristics Data of NSN 5910-00-924-7028, 5910009247028

MRCCriteriaCharacteristic
ABHP(NON-CORE DATA) OVERALL LENGTH0.500 INCHES NOMINAL
AEBZSCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
CQBQCAPACITANCE VALUE PER SECTION10000.000 PICOFARADS SINGLE SECTION
AARGRELIABILITY INDICATORNOT ESTABLISHED
CWJKCASE MATERIALPLASTIC
CWSSDIELECTRIC MATERIALPLASTIC
ADATBODY WIDTH0.471 INCHES NOMINAL
ABMK(NON-CORE DATA) OVERALL WIDTH0.471 INCHES NOMINAL
CRTPTOLERANCE RANGE PER SECTION-10.00 TO 10.00 PERCENT SINGLE SECTION
AAQLBODY STYLEW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
ABJTTERMINAL LENGTH1.500 INCHES NOMINAL
TTQYTERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD
ADAQBODY LENGTH0.500 INCHES NOMINAL
CQLZTEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS500.0 SINGLE SECTION
ABKW(NON-CORE DATA) OVERALL HEIGHT0.234 INCHES NOMINAL
CQWMNONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION200.0 DC SINGLE SECTION
AEBPCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM
ADAUBODY HEIGHT0.234 INCHES NOMINAL
CQJJNONDERATED OPERATING TEMP-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8532250080 (NAICS 334416) Fixed capacitors, dielectric of paper or plastic, nesoi
SITC : 77866 Paper or plastics dielectric fixed capacitors

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q22tmx-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061400 - Condensers/parts noi/capacitors
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top