Buy 6400A-6250A-604 Oscilloscope part by Digitec Corp

Part Number:  6400A-6250A-604
Alternate P/N:  6400A6250A604
Manufacturer:  digitec corp
NIIN:  001691649
Item Name :  oscilloscope
CAGE Code:  16152
INC Code:  00357
Country:  USA
NCB Code:  00
FSG:  66 Instruments And Laboratory Equipment

We've received your request for 6400A-6250A-604 (described as Oscilloscope), manufactured by Digitec Corp with CAGE code 16152. This part is registered under NSN 6625-00-169-1649, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 00-169-1649, NCB code 00 (origin: USA), and INC 00357. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 6400A-6250A-604 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 6400A-6250A-604

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 6400A-6250A-604, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-00-169-1649, 6625001691649

MRCCriteriaCharacteristic
BHFBCALIBRATING PEAK TO PEAK AMPLITUDE1.0 VOLTS NOMINAL
BHDRY-AXIS FREQUENCY RESPONSE RATING20.0 HERTZ MINIMUM AND 10000.0 HERTZ MAXIMUM
BHFSPLUG IN UNIT FUNCTION AND QUANTITYVERTICAL AMPLIFIER 1
BGQNSWEEP CIRCUIT TYPEHORIZONTAL
ZZZTNONDEFINITIVE SPEC/STD DATAAN/USM-368 TYPE
BGQKSCREEN SIZE5 IN.
BGQMGENERATOR DRIVEN FEATUREINCLUDED
BHDQX-AXIS FREQUENCY RESPONSE RATING20.0 HERTZ MINIMUM AND 10000.0 HERTZ MAXIMUM
BHDTAMPLIFIER INPUT IMPEDANCE RATING PROVISIONPROVIDED
BHDZAMPLITUDE CALIBRATING VOLTAGE WAVEFORMSQUARE WAVE
BHFCMEASUREMENT RANGE QUANTITY1
BHFFCALIBRATED SCREEN SCALEINCLUDED
BHFHTRACE STORAGE TUBENOT INCLUDED
BHFTCAMERA RECORDING DEVICE ACCOMMODATIONPROVIDED
FAAZPHASESINGLE
AMSEVOLTAGE RATING115.0 VOLTS MINIMUM AND 230.0 VOLTS MAXIMUM
ATESBEAM QUANTITY1
BHDDAMPLIFIER DEFLECTION SENSITIVITY PROVISIONNOT PROVIDED
BHDHINPUT INTENSITY MODULATION FEATURENOT PROVIDED
BHDLPLATE DIRECT CONNECTION DEFLECTION SENSITIVITY PROVISIONNOT PROVIDED
BHDPFREQUENCY RESPONSE RATINGPROVIDED
BGSDEXPANDED SWEEPPROVIDED
BGRZTRIGGER SWEEP VOLTAGE AMPLITUDE RATING50.0 VOLTS NOMINAL
AKYDACCESSORY COMPONENTS AND QUANTITYCOVER 1
ABHPOVERALL LENGTH17.909 INCHES NOMINAL
BGQPSWEEP FREQUENCY RANGE0.000 TO 500.000 KILOHERTZ
ACZBFREQUENCY RATING50.0 HERTZ MINIMUM AND 400.0 HERTZ MAXIMUM
BGQLSWEEP CIRCUITSINCLUDED
BGSBTRIGGER SWEEP POLARITY SWITCHINCLUDED
ABKWOVERALL HEIGHT5.250 INCHES NOMINAL
AWECGRADUATION INTERVALGRADUATED IN V/MM ON BOTH AXES
AXGYMOUNTING METHODPORTABLE
BHDWX-AXIS INPUT IMPEDANCE RATING1.0 MEGOHMS NOMINAL
BHDXY-AXIS INPUT IMPEDANCE RATING1.0 MEGOHMS NOMINAL
BDJDACCURACY RANGE IN PERCENT-1.0 TO 1.0
ABMKOVERALL WIDTH16.750 INCHES NOMINAL
BHFDMEASUREMENT RANGE STEPS0.2 MV TO 20V PER CM
ACDCCURRENT TYPEAC

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL 7zte009
Quantity per pack No qup
Repariability If condemned or uneconomically repairable, then dispose at intermediate level.
Shelf Life N/A
SOS Nrp
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: M - 85.0
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: 5 - Low sensitivity, category iv, aa&e, unclassified
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top