Buy 1022 Generator Pulse part by Divco Wayne Electronics

Part Number:  1022
Manufacturer:  divco wayne electronics
NIIN:  006154490
Item Name :  generator pulse
CAGE Code:  04309
INC Code:  00411
Country:  USA
NCB Code:  00
FSG:  66 Instruments And Laboratory Equipment

We've received your request for 1022 (described as Generator Pulse), manufactured by Divco Wayne Electronics with CAGE code 04309. This part is registered under NSN 6625-00-615-4490, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 00-615-4490, NCB code 00 (origin: USA), and INC 00411. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 1022 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 1022

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 1022, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-00-615-4490, 6625006154490

MRCCriteriaCharacteristic
BHTPPULSE DURATION PER CHANNEL30.000 MICROSECONDS NOMINAL OUTPUT CHANNEL
BHTQPULSE RISE TIME PER CHANNEL200.000 NANOSECONDS NOMINAL OUTPUT CHANNEL
AGTABASIC SHAPE STYLERECTANGULAR OR SQUARE
BHTWPULSE PEAK AMPLITUDE PER CHANNEL250.000 MILLIVOLTS OPERATING CHANNEL
ABMKOVERALL WIDTH19.000 INCHES NOMINAL
BHTZSIGNAL DATA TYPE PER CHANNELOPERATING CHANNEL PULSE
BHTSPOLARITY PER CHANNELPOSITIVE OUTPUT CHANNEL NEGATIVE OUTPUT CHANNEL
BJBHCALIBRATED TOLERANCE IN PERCENT-1.7 TO 1.7
AJKHIDENTIFICATION DESIGNATORSG-89/UPM-68-80058
BHTRPULSE DECAY TIME PER CHANNEL200.000 NANOSECONDS NOMINAL OUTPUT CHANNEL
BHTTPULSE REPETITION RATE PER CHANNEL200.000 PULSES PER SECOND MINIMUM OUTPUT CHANNEL 6.000 KILOPULSES PER SECOND MAXIMUM OUTPUT CHANNEL
BJBQOPERATING AC FREQUENCY IN HERTZ50.0 MINIMUM SINGLE VOLTAGE 420.0 MAXIMUM SINGLE VOLTAGE
AKNAINCLOSURE TYPEHERMETICALLY SEALED
FAAZPHASESINGLE
AFSUAVERAGE LIFE MEASUREMENTNOT RATED
BKFCEXTERNAL AC OPERATING VOLTAGE IN VOLTS115.0 NOMINAL SINGLE VOLTAGE
BHTNIMPEDANCE RATING PER CHANNEL50.000 OHMS OPERATING CHANNEL
BHSXCIRCUIT CONSTRUCTION TYPESOLID STATE
BJBSCALIBRATION FUNCTIONPULSE REPETITION
ABKWOVERALL HEIGHT12.219 INCHES NOMINAL
ALBMOPERATING CONTROL METHODMANUAL
ABHPOVERALL LENGTH20.438 INCHES NOMINAL
AMQYINSTALLATION DESIGNRACK
AQZFCONTROL TYPELOCAL
BJBJOUTPUT WAVE SHAPERECTANGULAR
BHTBFREQUENCY PER CHANNEL30.0 MEGAHERTZ NOMINAL OPERATING CHANNEL

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8543200000 (NAICS 334515) Signal generators
SITC : 77878 Electrical machines and apparatus, having individual functions, n.E.S. (other than particle accelerators)

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

Freight Information

ACC: A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: Q - High sensitivity, category ii, aa&e, classified confidential
TCC: Z - No special type of cargo code applicable
WCC: 653 - Musical instruments

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top