Buy 58860-2 Resistor Variable W part by Donel Systems Llc

Part Number:  58860-2
Alternate P/N:  588602
Manufacturer:  donel systems llc
NIIN:  004705067
Item Name :  resistor variable w
CAGE Code:  98659
INC Code:  37408
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 58860-2 (described as Resistor Variable W), manufactured by Donel Systems Llc with CAGE code 98659. This part is registered under NSN 5905-00-470-5067, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-470-5067, NCB code 00 (origin: USA), and INC 37408. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 58860-2 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 58860-2

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 58860-2, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 58860-2 with NSN 5905-00-470-5067, 5905004705067

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-470-5067

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

59050047050670N
CIICHCCESDPMICCriticalityENAC
U A0
Part NumberISCRNVCRNCCHCCMSDSSADC
2-714-2223

Characteristics Data of NSN 5905-00-470-5067, 5905004705067

MRCCriteriaCharacteristic
CRKSTAP LOCATION TOLERANCE PER SECTION-5.0 TO 5.0 OHMS SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
CSBWTAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS2222.0 SINGLE SECTION AND 2222.0 SINGLE SECTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER65.0 SINGLE SECTION
TESTTEST DATA DOCUMENT82340-58860 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWIN
TTQYTERMINAL TYPE AND QUANTITY5 TURRET
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER1.31200 INCHES MINIMUM AND 1.31250 INCHES MAXIMUM
AAVMPILOT LENGTH0.0620 INCHES NOMINAL
ABPAUNDERCUT DIAMETER1.312 INCHES NOMINAL
ABPCUNDERCUT WIDTH0.0730 INCHES NOMINAL
ABPMBODY DIAMETER1.437 INCHES NOMINAL
ABWVSHAFT DIAMETER0.1249 INCHES MAXIMUM
ABXFSHAFT LENGTH0.750 INCHES NOMINAL
ADAQBODY LENGTH1.250 INCHES MAXIMUM
AECZMOUNTING LIP DIAMETER1.4370 INCHES NOMINAL
AEDAMOUNTING LIP DEPTH0.0930 INCHES NOMINAL
AEDXSHAFT STYLEROUND
AEDZSHAFT BEARING TYPEBEARING
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION360.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE0.40 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE0.40 INCH-OUNCES
AEGDMECHANICAL BACKLASH IN DEG ANGULAR ROTATION0.25
AFJNFRAGILITY FACTORMODERATELY RUGGED
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODCLAMP RING
CBBLFEATURES PROVIDEDHUMIDITY PROOF
CQCCELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION PROPORTIONAL CONFORMITY
CRJSFIXED TAP QUANTITY PER SECTION2 SINGLE SECTION

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top