Buy M28754 32-23GCQ Connector Modular P part by Ducommun Labarge Technologies Inc

Part Number:  M28754 32-23GCQ
Alternate P/N:  M287543223GCQ
NIIN:  013456101
Item Name :  connector modular p
CAGE Code:  07618
INC Code:  38439
Country:  USA
NCB Code:  01

We've received your request for M28754 32-23GCQ (described as Connector Modular P), manufactured by Ducommun Labarge Technologies Inc with CAGE code 07618. This part is registered under NSN 5935-01-345-6101, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-345-6101, NCB code 01 (origin: USA), and INC 38439. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your M28754 32-23GCQ requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for M28754 32-23GCQ

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part M28754 32-23GCQ, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number M28754 32-23GCQ with NSN 5935-01-345-6101, 5935013456101

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-01-345-6101

Item PartTypeName:

CONNECTOR,MODULAR PLUG,ELECTRICA

59350134561010PA
CIICHCCESDPMICCriticalityENAC
UAG
Part NumberISCRNVCRNCCHCCMSDSSADC
2635-088-20 2-61523

Characteristics Data of NSN 5935-01-345-6101, 5935013456101

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH2.610 INCHES MINIMUM AND 2.630 INCHES MAXIMUM
ABMKOVERALL WIDTH0.290 INCHES MAXIMUM
ADZCENVIRONMENTAL PROTECTIONHUMIDITY RESISTANT AND SALT WATER RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT
AFQXCONTACT POSITION ARRANGEMENT STYLE40 SINGLE MATING END
AFRTSHELL TYPEHOOD,TOP OPENING
AAQLBODY STYLERECTANGULAR SHAPE W/CABLE CLAMP
ABKWOVERALL HEIGHT1.680 INCHES MAXIMUM
AFQJCABLE ENTRANCE DIAMETER1.590 INCHES NOMINAL
AFQWMATING END QUANTITY1
AFQZCONTACT REMOVABILITYREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRNPOLARIZATION METHODGUIDE PIN/SOCKET
AFRVCONNECTOR LOCKING METHODFRICTION
AFRWCONNECTOR CABLE STRAIN RELIEF METHODCABLE CLAMP
CQTMTERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING
CQZGINSERT MATERIALPLASTIC DIALLYL PHTHALATE GLASS FILLED SINGLE MATING END
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TY 2,CL 1,GRADE C MIL SPEC 1ST TREATMENT RESPONSE AND QQ-N-290,CL 1 FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CSCFTERMINAL TYPEPIN SINGLE MATING END SINGLE CONTACT GROUPING
CSLRGUIDE DESIGN AND LOCATIONV GROOVE PIN RIGHT-HAND AT 2 OCLOCKD SHAPE PIN LEFT-HAND AT 12 OCLOCK
CSPTSHELL MATERIALALUMINUM ALLOY
CSWMSHELL SURFACE TREATMENTANODIZE
CTBCSHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
CTKLINSERT MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-14,TY SDG-F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
CXCGINCLUDED CONTACT QUANTITY40 SINGLE MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPEROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
FEATSPECIAL FEATURESCABLE CLAMP ON BACK
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PMWTPRECIOUS MATERIAL AND WEIGHT0.040 GOLD GRAINS,TROY
PRMTPRECIOUS MATERIALGOLD

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8538907080 (NAICS 335314) Parts suitable for use solely or principally with the apparatus for heading 8535, 8536, 8537, nesoi
SITC : 77282 Parts of electrical apparatus for switching or protecting electrical circuits for making connections to or in electrical circuits, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top