We've received your request for SD32015 (described as Shaft Axle Automoti), manufactured by Duplex with CAGE code 18859. This part is registered under NSN 2520-00-871-8941, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-871-8941, NCB code 00 (origin: USA), and INC 10852. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your SD32015 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-00-871-8941 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 008718941 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3202J2974 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.562 INCHES NOMINAL |
| AAZQ | HOLE DEPTH | 0.437 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 47.500 INCHES NOMINAL |
| AGGP | DRILLED HOLE DIAMETER | 0.312 INCHES NOMINAL |
| AHTC | FLANGE OUTSIDE DIAMETER | 6.500 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 3.000 INCHES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.875 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 2.000 INCHES NOMINAL |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| ASXK | HOLE QUANTITY | 1 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 12 UNTHREADED HOLE |
| BBCF | SECOND END SPLINE QUANTITY | 21 |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| BNTX | END HOLE TYPE | DRILLED |
| BNYS | FLANGE OVERALL THICKNESS | 0.437 INCHES NOMINAL |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.437 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| End Use : 21180 | Industrial machines, other |
|---|---|
| Schedule B : 8483909500 (NAICS 333613) | Parts, nesoi, of bearing housings & plain shaft bearings, housed bearings, clutches, universal joints, flywheels and transmission shafts |
| SITC : 74890 | Parts, n.E.S., for transmission shafts and cranks, bearing housings, gears, gearing, ball screws, gear boxes, flywheels and pulleys, clutches, etc. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | 9b----- |
| Quantity per pack | No qup |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 133300 - Machinery/machines noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 586 - Vehicle parts, other than automobile |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
