Buy 283HA-21 Hose Assembly Nonme part by Dynacon Inc

Part Number:  283HA-21
Alternate P/N:  283HA21
Manufacturer:  dynacon inc
NIIN:  013901056
Item Name :  hose assembly nonme
CAGE Code:  0FSD0
INC Code:  20311
Country:  USA
NCB Code:  01
FSG:  47 Pipe Tubing Hose and Fittings

We've received your request for 283HA-21 (described as Hose Assembly Nonme), manufactured by Dynacon Inc with CAGE code 0FSD0. This part is registered under NSN 4720-01-390-1056, classified in FSG 47 Pipe Tubing Hose and Fittings / FSC 4720 Hose and Tubing Flexible. Our verification process will confirm traceability through supporting identifiers including NIIN 01-390-1056, NCB code 01 (origin: USA), and INC 20311. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 283HA-21 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 283HA-21

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 283HA-21, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 283HA-21 with NSN 4720-01-390-1056, 4720013901056

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4720-01-390-1056

Item PartTypeName:

HOSE ASSEMBLY,NONMETALLIC

47200139010560N
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
283HA-21225

Characteristics Data of NSN 4720-01-390-1056, 4720013901056

MRCCriteriaCharacteristic
AAGRCROSS-SECTIONAL SHAPE STYLEROUND
ABJHTEMP RATING-40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE
CQCSLAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED WIRE AND 2ND LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
CRWLINSIDE SURFACE CONDITIONSMOOTH
MEDAMEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON SINGLE RESPONSE
CBBLFEATURES PROVIDEDNONSKIVE
THSDTHREAD SERIES DESIGNATORUNF 1ST END
AAJFTHREAD DIRECTIONRIGHT-HAND 1ST END
ABKVOUTSIDE DIAMETER0.750 INCHES NOMINAL
CQJXNOMINAL THREAD SIZE0.562 INCHES 1ST END
CQBDBURST TEST PRESSURE16000.0 POUNDS PER SQUARE INCH
CQGH(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIALCOMPLETE FITTING STEEL
AAJDTHREAD CLASS3B 1ST END
CQRBSEAT ANGLE37.0 DEGREES 1ST END
AGAVEND ITEM IDENTIFICATIONDYNACON INC. 75HP DSILOS TOW WINCH
CRXXMEASURING METHOD AND LENGTH22.500 INCHES NOMINAL OVERALL
CQGMMAXIMUM OPERATING PRESSURE4000.0 POUNDS PER SQUARE INCH
CRDWHYDROSTATIC TEST PRESSURE8000.0 POUNDS PER SQUARE INCH
ADJM(NON-CORE DATA) INNER CONVEYING TUBE MATERIALRUBBER, SYNTHETIC
CQBG(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITYNOT INCLUDED
AWLSCONNECTION TYPETHREADED INTERNAL TUBE 1ST END
AHNCCONNECTION STYLESWIVEL NUT FLARE 1ST END
AARXINSIDE DIAMETER0.375 INCHES NOMINAL
ADLF(NON-CORE DATA) HOSE OR TUBING SPEC/STD DATASAE J517,1002,TYPE AT-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
ACKHMINIMUM INSIDE BENDING RADIUS5.000 INCHES
CQBB(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
CRJMOUTER COVERING ENVIRONMENTAL PROTECTIONOIL RESISTANT AND WEATHERPROOF
AKUUEND CONNECTION DESIGNSTRAIGHT 1ST END

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 051140 - Hose: noi tubing
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 846 - Fabricated nonmetallic materials

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top