Buy A717-1 Counter Rotating part by Dynapar Corporation

Part Number:  A717-1
Alternate P/N:  A7171
Manufacturer:  dynapar corporation
NIIN:  000141676
Item Name :  counter rotating
CAGE Code:  79142
INC Code:  30762
Country:  USA
NCB Code:  00
FSG:  66 Instruments And Laboratory Equipment

We've received your request for A717-1 (described as Counter Rotating), manufactured by Dynapar Corporation with CAGE code 79142. This part is registered under NSN 6680-00-014-1676, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 00-014-1676, NCB code 00 (origin: USA), and INC 30762. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your A717-1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for A717-1

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part A717-1, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6680-00-014-1676, 6680000141676

MRCCriteriaCharacteristic
AFDSLongest Horizontal Distance Between Mounting Centers0.360 INCHES NOMINAL
AFDVLongest Vertical Distance Between Mounting Centers0.100 INCHES NOMINAL
STYLStyle DesignatorUNENCLOSED SQUARE OR RECTANGULAR
ABXFShaft Length0.250 INCHES NOMINAL
ABMKOverall Width0.672 INCHES NOMINAL
CSWSNumeral Display MethodDRUM
BCNXMounting Type For Which DesignedBASE SINGLE REGISTER SINGLE TIER
ABHPOverall Length1.050 INCHES MINIMUM AND 1.060 INCHES MAXIMUM
ABKWOverall Height1.000 INCHES NOMINAL
AXECRegister Reset MethodTOTAL COUNTER MANUAL SINGLE REGISTER SINGLE TIER
CSWWShaft Rotation Direction And Maximum Speed In Rpm120.0 COUNTERCLOCKWISE SINGLE REGISTER SINGLE TIER
CSWTNumeral Readout00 MINIMUM SINGLE REGISTER SINGLE TIER AND 999 MAXIMUM SINGLE REGISTER SINGLE TIER
AXHRMounting Facility Type And Quantity4 THREADED HOLE
HUESColorWHITE SINGLE REGISTER SINGLE TIER FIGURE
ANRDShaft Revolutions Per Count1.00 SINGLE REGISTER SINGLE TIER
ANREMaximum Count Rate120.0 PER MINUTE SINGLE REGISTER SINGLE TIER
ANQDRegister Quantity1
ANQTFigure Height0.190 INCHES NOMINAL SINGLE REGISTER SINGLE TIER
ANRLMounting Arrangement StyleFOUR POSITION SQUARE/RECTANGLE
HUESColorBLACK SINGLE REGISTER SINGLE TIER FIGURE BACKGROUND
ANQSFigure Quantity Per Register3 SINGLE REGISTER SINGLE TIER
MRCDecoded RequirementClear Text Reply
ABWVShaft Diameter0.125 INCHES NOMINAL
AXEGActuating Device LocationRIGHT SIDE SINGLE REGISTER SINGLE TIER
AXEDRegister FunctionADD SINGLE REGISTER SINGLE TIER

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9029100000 (NAICS 334514) Revolution counters, production counters, taximeters, odometers, pedometers and the like
SITC : 87321 Revolution counters, production counters, taximeters, odometers, pedometers and the like

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Y
Classification Control U
MGMT_CTL -------
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: S - Office and school supplies and equipment including office machines, furniture and stationary.
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: F - 150.0
NMFC: 058240 - Recording devices gauges/meters noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 653 - Musical instruments

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top