Buy 766MHF117 Oscilloscope part by E And R Electronics Inc

Part Number:  766MHF117
Manufacturer:  e and r electronics inc
NIIN:  004819899
Item Name :  oscilloscope
CAGE Code:  30669
INC Code:  00357
Country:  USA
NCB Code:  00
FSG:  66 Instruments And Laboratory Equipment

We've received your request for 766MHF117 (described as Oscilloscope), manufactured by E And R Electronics Inc with CAGE code 30669. This part is registered under NSN 6625-00-481-9899, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 00-481-9899, NCB code 00 (origin: USA), and INC 00357. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 766MHF117 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 766MHF117

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 766MHF117, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-00-481-9899, 6625004819899

MRCCriteriaCharacteristic
BHFBCALIBRATING PEAK TO PEAK AMPLITUDE1.0 VOLTS NOMINAL
BHDGHORIZONTAL DEFLECTION SENSITIVITY VOLTAGE RATING0.1 VOLTS MINIMUM PEAK TO PEAK PER CENTIMETER AND 1.0 VOLTS MAXIMUM PEAK TO PEAK PER CENTIMETER
BHFSPLUG IN UNIT FUNCTION AND QUANTITYVERTICAL AMPLIFIER1 AND HORIZONTAL AMPLIFIER
BGQKSCREEN SIZE6 BY 10 CENTIMETERS
RDALIII REFERENCE DATA AND LITERATURETO 33A1-13-419-1
BGQNSWEEP CIRCUIT TYPEHORIZONTAL AND VERTICAL
BHDDAMPLIFIER DEFLECTION SENSITIVITY PROVISIONPROVIDED
BHDFVERTICAL DEFLECTION SENSITIVITY VOLTAGE RATING10.0 MILLIVOLTS MINIMUM PEAK TO PEAK PER CENTIMETER AND 100.0 MILLIVOLTS MAXIMUM PEAK TO PEAK PER CENTIMETER
FEATSPECIAL FEATURESSINGLE OR DUEL TRACE TO VERTICAL PLUG-IN
BHDLPLATE DIRECT CONNECTION DEFLECTION SENSITIVITY PROVISIONPROVIDED
ABHPOVERALL LENGTH20.625 INCHES NOMINAL
BGQMGENERATOR DRIVEN FEATUREINCLUDED
BGQPSWEEP FREQUENCY RANGE0.000 TO 50.000 MEGAHERTZ
BHDTAMPLIFIER INPUT IMPEDANCE RATING PROVISIONPROVIDED
BHDWX-AXIS INPUT IMPEDANCE RATING1.0 MEGOHMS NOMINAL
FAAZPHASESINGLE
ABMKOVERALL WIDTH9.750 INCHES NOMINAL
AMSEVOLTAGE RATING105.0 VOLTS MINIMUM AND 125.0 VOLTS MAXIMUM AND 210.0 VOLTS MINIMUM AND 250.0 VOLTS MAXIMUM
AXGYMOUNTING METHODTABLE
BGSDEXPANDED SWEEPPROVIDED
BHFTCAMERA RECORDING DEVICE ACCOMMODATIONNOT PROVIDED
BHDNDIRECT CONNECTION HORIZONTAL DEFLECTION SENSITIVITY VOLTAGE RATING5.2 VOLTS MINIMUM PEAK TO PEAK PER CENTIMETER AND 7.2 VOLTS MAXIMUM PEAK TO PEAK PER CENTIMETER
ATESBEAM QUANTITY1
BHDZAMPLITUDE CALIBRATING VOLTAGE WAVEFORMSQUARE WAVE
BDJDACCURACY RANGE IN PERCENT-1.0 TO 1.0 OR -2.5 TO 2.5
SR-5DESIGN CONTROL REFERENCE766MHF117
SR-5MANUFACTURERS CODE30669
BGQLSWEEP CIRCUITSINCLUDED
BGSBTRIGGER SWEEP POLARITY SWITCHINCLUDED
BHDMDIRECT CONNECTION VERTICAL DEFLECTION SENSITIVITY VOLTAGE RATING10.0 VOLTS MINIMUM PEAK TO PEAK PER CENTIMETER AND 15.0 VOLTS MAXIMUM PEAK TO PEAK PER CENTIMETER
SR-5THE MANUFACTURERS DATA
BHDXY-AXIS INPUT IMPEDANCE RATING1.0 MEGOHMS NOMINAL
BHDYZ-AXIS INPUT IMPEDANCE RATING1.0 MEGOHMS NOMINAL
ACDCCURRENT TYPEAC
ABKWOVERALL HEIGHT13.750 INCHES NOMINAL
ACZBFREQUENCY RATING60.0 HERTZ NOMINAL

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Y
Classification Control U
MGMT_CTL --yrh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Flz
Unit of Measure Ea

Freight Information

ACC: A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: Q - High sensitivity, category ii, aa&e, classified confidential
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top