Buy ETM-1 Transducer Motional part by E I L Instruments Inc

Part Number: ETM-1

Alternate P/N: ETM1

Manufacturer: e i l instruments inc

NSN: 6695-01-122-0083

NIIN: 011220083

Item Name : transducer motional

CAGE Code: 03691

FSC: 6695 Combination And Miscellaneous Instruments

INC Code: 61282

Country: USA

NCB Code: 01

FSG: 66 Instruments And Laboratory Equipment

We've received your request for ETM-1 (described as Transducer Motional), manufactured by E I L Instruments Inc with CAGE code 03691. This part is registered under NSN 6695-01-122-0083, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6695 Combination And Miscellaneous Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 01-122-0083, NCB code 01 (origin: USA), and INC 61282. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your ETM-1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for ETM-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part ETM-1, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6695-01-122-0083, 6695011220083

MRC	Criteria	Characteristic
ABMK	OVERALL WIDTH	2.120 INCHES NOMINAL
ABHP	OVERALL LENGTH	4.000 INCHES NOMINAL
SR-5	THE MANUFACTURERS DATA
FEAT	SPECIAL FEATURES	60 HZ CENTER 85-135 VAC, MAX OVERLOAD 150 VAC CONTINUOUS-200 VAC FOR ONE MINUTE, BURDEN 120 VAC LESS THAN 2 VA, OPERATING TEMP RANGE MINUS 20 DEGREE C TO PLUS 65 DEGREE C, MAX TEMP EFFECT PLUS 0.2 PERCENT OF CENTER FREQUENCY, OUTPUT MINUS 5 TO PLUS 5 MA. INTO 0-10 K OHMS LINEARITY PLUS OR MINUS 0.02 PERCENT OF CENTER FREQUENCY, LINE PLUS OR MINUS 0.02 PERCENT OF CENTER FREQUENCY, ADJUSTMENTS-ZERO PLUS OR MINUS 10 PERCENT OF LOW FREQUENCY MIN ADJ. , CALIBRATION PLUS OR MINUS 20 PERCENT OF FULL SCALE VALUE, AC COMPONENT OF OUTPUT SG. 1 PERCENT, RESPONSE TIME 400 MS, DIELECTRIC TEST 1500 VRMS, MEETS IEEE SWC SURGE TEST, 4 UNTHREADED MOUNTING HOLES 0.203 IN. DIA.. 3.500 IN. APART MEASURED LENGTHWISE, 1.500 IN. APART MEASURED ACROSS WIDTH
ACZB	FREQUENCY RATING	55.0 HERTZ MINIMUM AND 65.0 HERTZ MAXIMUM
SR-5	DESIGN CONTROL REFERENCE	ETM-1
ABKW	OVERALL HEIGHT	4.000 INCHES NOMINAL
SR-5	MANUFACTURERS CODE	03691
AGAV	III END ITEM IDENTIFICATION	VOLTMETER 50-103121 PZSJ ONBOARD 270 FT WMEC COAST GUARD VESSELS

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	C
Classification Control	U
MGMT_CTL	S-09---
Quantity per pack	1
Repariability	If condemned or economically unserviceable, dispose by theoperator/crew
Shelf Life	N/A
SOS	Znc
Unit of Measure	Ea