Buy 600702 Motor Hydraulic part by Eaton Aerospace Ltd

Part Number: 600702

Manufacturer: eaton aerospace ltd

NSN: 1650-00-554-8102

NIIN: 005548102

Item Name : motor hydraulic

CAGE Code: 62983

FSC: 1650 Aircraft Hydraulic Vacuum and De-icing System Components

INC Code: 06128

Country: USA

NCB Code: 00

FSG: 16 Aircraft Components and Accessories

We've received your request for 600702 (described as Motor Hydraulic), manufactured by Eaton Aerospace Ltd with CAGE code 62983. This part is registered under NSN 1650-00-554-8102, classified in FSG 16 Aircraft Components and Accessories / FSC 1650 Aircraft Hydraulic Vacuum and De-icing System Components. Our verification process will confirm traceability through supporting identifiers including NIIN 00-554-8102, NCB code 00 (origin: USA), and INC 06128. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 600702 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 600702

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 600702, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 600702 with NSN 1650-00-554-8102, 1650005548102

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
1650-00-554-8102 Item PartTypeName: MOTOR,HYDRAULIC	1650	005548102	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
600702	2	2	5

Characteristics Data of NSN 1650-00-554-8102, 1650005548102

MRC	Criteria	Characteristic
AAJF	THREAD DIRECTION	RIGHT-HAND
AAPL	TORQUE LOAD RATING	23.5 INCH-POUNDS
AAUH	SPLINE MINOR DIAMETER	0.417 INCHES NOMINAL
AAUJ	SPLINE MAJOR DIAMETER	0.533 INCHES NOMINAL
AAXX	MOUNTING TYPE	FLANGE
ABSA	SPLINE QUANTITY	11
ABSF	KEY WIDTH	0.281 INCHES NOMINAL
ABTB	MOUNTING HOLE DIAMETER	0.281 INCHES NOMINAL
ABTJ	MOUNTING HOLE QUANTITY	4
ABUJ	THREAD SIZE	0.375-24 AND 0.563-18
AEQC	OPERATING SPEED AT RATED CAPACITY IN RPM	8000.0
AGJS	PITCH DIAMETER	0.458 INCHES NOMINAL
AJAB	DRIVE SHAFT TYPE	SPLINED,INVOLUTE EXTERNAL
AJYP	SCREW THREAD SERIES DESIGNATOR	UNF
AKCT	SHAFT ROTATION DIRECTION	COUNTERCLOCKWISE
APJC	THREAD LOCATION	INTERNAL
ARQA	SHAFT PROTRUSION LENGTH	0.625 INCHES NOMINAL
ASAP	SPLINE PITCH	24/48
ASMM	CONNECTION QUANTITY	3
AWLS	CONNECTION TYPE	DRAIN
AWLS	CONNECTION TYPE	INLET
AWLS	CONNECTION TYPE	OUTLET
AXFB	MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE	3000 PSI AT NO SPECIFIED TEMP RANGE
AXFC	CONNECTION DESIGN	THREADED
AXFG	SPLINE PRESSURE ANGLE IN DEG	30.0
AXFH	SPLINE LENGTH	0.500 INCHES NOMINAL
AXFM	DRIVE SHAFT GOVERNMENT STANDARD	AND10263
AXFN	MOUNTING GOVERNMENT STANDARD	AND10260
AXFP	DISPLACEMENT TYPE	CONSTANT
AXFQ	CONSTANT DISPLACEMENT PER REVOLUTION	0.049 CUBIC INCHES
AZFE	CONNECTION GOVERNMENT SPEC/STD	AND10050-3,AND10050-6 AND AND10050-6
AZFG	MOUNTING BOLT HOLE SPACING	1.875 IN. BY 1.875 IN. C TO C
FEAT	SPECIAL FEATURES	W/INTEGRAL SPEED CONTROL
MATT	MATERIAL	ALUMINUM ALLOY HOUSING
SFTT	SURFACE TREATMENT	ANODIZE HOUSING
ZZZV	FSC APPLICATION DATA	AIRCRAFT HYDRAULIC SYSTEM KC135

Schedule B & Trade

End Use : 50070	Parts for military-type goods
Schedule B : 8803300060 (NAICS 336413)	Other parts of airplanes or helicopters for use in military aircraft (excludes propellers, rotors, undercarriages, and parts thereof)
SITC : 79295	Parts of airplanes or helicopters, n.E.S.

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	C
Classification Control	U
MGMT_CTL	7r--ar-
Quantity per pack	1
Repariability	If condemned or uneconomically repairable, then dispose at intermediate level.
Shelf Life	N/A
SOS	Nrp
Unit of Measure	Ea

Freight Information

ACC:	A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	M - 85.0
LTL:	P - 77.5
NMFC:	062120 - Generators/motors/parts noi sub1
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)