Buy 7418 Attenuator Variable part by Edo Artisan Inc

Part Number:  7418
Manufacturer:  edo artisan inc
NIIN:  000935544
Item Name :  attenuator variable
CAGE Code:  95692
INC Code:  00838
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 7418 (described as Attenuator Variable), manufactured by Edo Artisan Inc with CAGE code 95692. This part is registered under NSN 5985-00-093-5544, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5985 Antennas Waveguides and Related Equipment. Our verification process will confirm traceability through supporting identifiers including NIIN 00-093-5544, NCB code 00 (origin: USA), and INC 00838. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 7418 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 7418

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 7418, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 7418 with NSN 5985-00-093-5544, 5985000935544

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5985-00-093-5544

Item PartTypeName:

ATTENUATOR,VARIABLE

59850009355440P
CIICHCCESDPMICCriticalityENAC
U A0
Part NumberISCRNVCRNCCHCCMSDSSADC
7418625

Characteristics Data of NSN 5985-00-093-5544, 5985000935544

MRCCriteriaCharacteristic
AAFSAPPLICATION DESIGNTRANSMISSION LINE
AAQLBODY STYLECOAXIAL TYPE
ABHPOVERALL LENGTH5.250 INCHES NOMINAL
ABKWOVERALL HEIGHT3.469 INCHES NOMINAL
ABMKOVERALL WIDTH3.969 INCHES NOMINAL
ABWFSCALE LINEARITYLINEAR
ABWGSCALE DIVISION QUANTITY15
AHTWVOLTAGE STANDING WAVE RATIO3.50
AHUCCOAXIAL CONNECTOR SERIES DESIGNATIONN
AJDBPOWER RATING500.0 MILLIWATTS AVERAGE
ASYCINSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS1.0
ASYDOVERALL ATTENUATION RANGE IN DECIBELS0.0 TO 59.0
ASYFATTENUATION VARIATION METHODSTEPPED
ASYGSTEP POSITION QUANTITY59
ASYHATTENUATION PER STEP IN DECIBELS1.0 AND 10.0
CQTQADJUSTMENT DEVICE TYPE AND QUANTITY2 SLOTTED SCREW
CQYJMOUNTING FACILITY PATTERNFOUR POSITION RECTANGULAR
CTGGIMPEDANCE RATING IN OHMS50.0 INPUT-OUTPUT
TESTTEST DATA DOCUMENT80063-9008064 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTING G
TTQYTERMINAL TYPE AND QUANTITY2 CONNECTOR,COAXIAL,FEMALE
ZZZVFSC APPLICATION DATAANTENNAS,WAVEGUIDES,AND RELATED EQUIPMENT

Schedule B & Trade

End Use : 21400 Telecommunications equipment
Schedule B : 8529109000 (NAICS 334220) Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi
SITC : 76493 Parts of television receivers, radiobroadcast receivers, transmission apparatus for radio telephony, telegraphy, broadcasting or television etc.

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: J - 100.0
NMFC: 061700 - Elec appliances/instruments noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top