We've received your request for 7512OPT002 (described as Meter Noise Level), manufactured by Edo Corporation with CAGE code 00752. This part is registered under NSN 6625-01-136-5936, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-136-5936, NCB code 01 (origin: USA), and INC 48206. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 7512OPT002 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| MRC | Criteria | Characteristic |
|---|---|---|
| BHDC | SCALE GRADUATION TYPE | NONLINEAR SINGLE INDICATOR SINGLE RANGE |
| AMKD | INDICATOR TYPE | DIAL W/POINTER |
| CTWN | OPERATING VOLTAGE RATING IN VOLTS | 115.0 AC MINIMUM AND 230.0 AC MAXIMUM |
| STYL | STYLE DESIGNATOR | D1 RECTANGULAR OR SQUARE |
| FAAZ | PHASE | SINGLE |
| APMM | DIAL SCALE MARKING COLOR | BLACK SINGLE INDICATOR SINGLE RANGE |
| BLSB | SCALE SELECTION METHOD | SWITCH |
| ASSS | POINTER COLOR | BLACK SINGLE INDICATOR SINGLE RANGE |
| FEAT | SPECIAL FEATURES | SELF-CALIBRATION FOR 10 MHZ TO 40 GHZ NOISE SOURCES, 5 SELECTABLE RANGES, SIGNAL STRENGTH AND OVERRANGE INDICATOR, CAN USE AILTECH 76 SERIES SOLID STATE NOISE SOURCES OR SERIES 70 GAS-DISCHARGE NOISE GENERATORS |
| ABHP | OVERALL LENGTH | 20.125 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 19.750 INCHES NOMINAL |
| AMQY | INSTALLATION DESIGN | BENCH |
| BHMW | MEASUREMENT RANGE | 0.010 TO 10.000 GIGAHERTZ SINGLE INDICATOR 1ST RANGE 0.000 TO 33.000 GIGAHERTZ SINGLE INDICATOR 2ND RANGE |
| AACT | CIRCUIT CURRENT FOR WHICH DESIGNED | AC |
| ACZB | FREQUENCY RATING | 50.0 HERTZ MINIMUM AND 400.0 HERTZ MAXIMUM |
| CBBL | FEATURES PROVIDED | PORTABLE |
| ABKW | OVERALL HEIGHT | 8.000 INCHES NOMINAL |
| APPN | ACCURACY IN PERCENT | -0.1 TO 0.1 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE |
| End Use : 21160 | Measuring, testing, control instruments |
|---|---|
| Schedule B : 9030890100 (NAICS 334515) | Instruments and apparatus without a recording device specially designed for telecommunications, nesoi |
| SITC : 87478 | Instruments and apparatus for measuring or checking electrical quantities, n.E.S. |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| ESD | A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | Y |
|---|---|
| Classification Control | U |
| MGMT_CTL | Sf8rh-n |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Flz |
| Unit of Measure | Ea |
| ACC: | A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | J - 100.0 |
| LTL: | J - 100.0 |
| NMFC: | 136740 - Meters elec/parts sub1 |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | 2 - Protected/sensitive non-hazardous/non-esd commodities |
| WCC: | 657 - Instruments, electric meter |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
