Buy 371OPTP1P2P5 Counter Electronic part by Eip Microwave Inc

Part Number:  371OPTP1P2P5
Manufacturer:  eip microwave inc
NIIN:  011606482
Item Name :  counter electronic
CAGE Code:  34257
INC Code:  26835
Country:  USA
NCB Code:  01
FSG:  66 Instruments And Laboratory Equipment

We've received your request for 371OPTP1P2P5 (described as Counter Electronic), manufactured by Eip Microwave Inc with CAGE code 34257. This part is registered under NSN 6625-01-160-6482, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 01-160-6482, NCB code 01 (origin: USA), and INC 26835. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 371OPTP1P2P5 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 371OPTP1P2P5

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 371OPTP1P2P5, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-01-160-6482, 6625011606482

MRCCriteriaCharacteristic
BFJCACCURACY RATINGPORM 1 COUNT PORM TIME BASE ERROR
BFQMINTERNAL CALIBRATION FEATURENOT INCLUDED
BFQQDISPLAY UNITS INDICATORNOT INCLUDED
AFHSACCESSORY COMPONENT QUANTITY3
ASKXELECTRICAL CONNECTION QUANTITY3
SR-5THE MANUFACTURERS DATA
ABMKOVERALL WIDTH425.0 MILLIMETERS NOMINAL
ALXZIII SPECIFIC USAGE DESIGNELECTRONIC TEST EQUIPMENT
AZCGACCESSORY COMPONENT NAMEPOWER CORD, 8FT WITH INTERNATIONAL PLUG; OPERATING/SERVICE MANUAL; PCB EXTENDER CARD
SR-5DESIGN CONTROL REFERENCE371OPTP1P2P5
ABHPOVERALL LENGTH499.0 MILLIMETERS NOMINAL
FEATSPECIAL FEATURESRESOLUTION: SELECTABLE, 1 HZ/1 MHZ; DISPLAY IS SECTIONALIZED TO READ HZ, MHZ, KHZ, GHZ; AUTOMATIC OPERATION AFTER BAND SELECTION; CONTROLS PROVIDED ARE: SAMPLE RATE-100 MS TO 10 SEC, BAND SELECT-BAND 1A,1B,11, OR 111, RESOLUTION-BLANKING OF UP TO SIX LEAST SIGNIFICANT DIGITS, GATE TIME, RESET-RESETS DISPLAY TO ZERO, INIITIIATES NEW READING, TEST-COUNTS/DISPLAYS INTERNAL 10 MHZ TIME BASE, INT/EXT TIME BASE-REARPANEL SWITCH SELECTS TIME BASE REFERENCE, INT POSITION TYPICALLY USED, POWER-APPLIES LINE POWER TO COUNTER; MINUS 30 DBM SENSITIVITY, PLUS 33 DBM (2 WATT) OVERLOAD PROTECTION, MULTIPLE SIGNAL DISCRIMINATION, 40 MHZ TO 200 MHZ FM TOLERANCE; LOCKBOX CAPABILITY; OPTIONS PROVIDE EXTREME ACCURACY MEASUREMENTS FROM 213.0 KHZ TO 1.917 GHZ W ACCURACY OF PORM 1 PPM TO PORM 5 PPM; INJECTS PRECISELY MEASURED SIGNALS INTO THE SUBSYSTEMS AND SUBASSEMBLIES BETWEEN FREQUENCIES OF 1.024 MHZ AND 1.917 MHZ;PROGRAMMABLE PHASE LOCKING OUTPUT LOOPTO A SIGNAL GENERATOR
AMSEVOLTAGE RATING115.0 VOLTS NOMINAL AND 230.0 VOLTS NOMINAL
BFHZMEASUREMENT TYPEFREQUENCY
AWJNIII UNPACKAGED UNIT WEIGHT29.000 POUNDS
AGBDELECTRICAL CONNECTION TYPEBNC AND TYPE N PRECISION FEMALE
BFJBFREQUENCY RANGE20.0 TO 18000000000.0 HERTZ OVERALL
ACZBFREQUENCY RATING50.0 HERTZ MINIMUM AND 60.0 HERTZ MAXIMUM
AXGYMOUNTING METHODBENCH
SR-5MANUFACTURERS CODE34257
BFQNDISPLAY TYPELIGHT EMITTING DIODE
ABKWOVERALL HEIGHT89.0 MILLIMETERS NOMINAL
BFQRDISPLAY POSITIONED DECIMAL POINTNOT PROVIDED
BFQPDISPLAY DIGIT QUANTITY11
BFQSDISPLAY STORAGE FACILITYNOT INCLUDED
BFQTREMOTE CONTROL PROVISIONSNOT INCLUDED
BFQWSOLID STATE FEATUREINCLUDED
AKVYACCESSORY CONTROLLING AGENCYEIP MICROWAVE CO.
BFQZPLUG-IN UNITS PROVISIONINCLUDED
BFRBSTANDARD FREQUENCY OUTPUT FEATURENOT INCLUDED
ALSFINTERNAL BATTERY ACCOMMODATIONNOT INCLUDED
BFJFGATE TIME1.0 SECONDS MINIMUM AND 10.0 MICROSECONDS MAXIMUM
ACDCCURRENT TYPEAC
ABJLWATTAGE RATING IN WATTS90.0

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC X
Classification Control U
MGMT_CTL -------
Quantity per pack 1
Repariability If condemned or uneconomically repairable , then dispose at direct support (ds) level.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: M - 85.0
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: Z - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top