Buy PP-62002-22 Switch Stepping part by Electro National Corporation

Part Number:  PP-62002-22
Alternate P/N:  PP6200222
NIIN:  010338749
Item Name :  switch stepping
CAGE Code:  54208
FSC:  5930 Switches
INC Code:  26954
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for PP-62002-22 (described as Switch Stepping), manufactured by Electro National Corporation with CAGE code 54208. This part is registered under NSN 5930-01-033-8749, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5930 Switches. Our verification process will confirm traceability through supporting identifiers including NIIN 01-033-8749, NCB code 01 (origin: USA), and INC 26954. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your PP-62002-22 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PP-62002-22

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part PP-62002-22, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 5930-01-033-8749, 5930010338749

MRCCriteriaCharacteristic
ABKWOVERALL HEIGHT4.28125 INCHES NOMINAL
ABMKOVERALL WIDTH2.46875 INCHES MAXIMUM
AKCVDRIVE TYPEINDIRECT
ALGCMOUNTING CONFIGURATION4 MTG STUDS 10-32THD 4.25 IN. BY 1.375 IN. MTG CENTERS
ANZXBANK LEVEL QUANTITY2
APABCONTACT TYPENONBRIDGING
APAMOPERATING CURRENT RATING110.0 MILLIAMPERES NOMINAL
APCCELECTRICAL RESISTANCE650.0 OHMS NOMINAL
ABHPOVERALL LENGTH5.125 INCHES MAXIMUM
ACDCCURRENT TYPEDC
ADJHMOUNTING METHODSTUD
AMSEVOLTAGE RATING110.0 VOLTS NOMINAL
ANZYCONTACT QUANTITY PER BANK LEVEL11
APAFMAGNETIC COIL QUANTITY1
APAGCOIL TYPEDRIVE
APCDAUXILIARY OFF-NORMAL CONTACT ARRANGEMENT2C
APCEAUXILIARY INTERRUPTER CONTACT ARRANGEMENT3C1B

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8535300080 (NAICS 335313) Isolating switches and make-and-break switches, for a voltage exceeding 1, 000 v, nesoi
SITC : 77244 Electrical isolating switches and make-and-break switches for a voltage exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top