Buy 28615-2 Switch Code Indicat part by Electro Switch Corp

Part Number:  28615-2
Alternate P/N:  286152
Manufacturer:  electro switch corp
NIIN:  010513059
Item Name :  switch code indicat
CAGE Code:  07126
INC Code:  62415
Country:  USA
NCB Code:  01

We've received your request for 28615-2 (described as Switch Code Indicat), manufactured by Electro Switch Corp with CAGE code 07126. This part is registered under NSN 5930-01-051-3059, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-051-3059, NCB code 01 (origin: USA), and INC 62415. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 28615-2 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 28615-2

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 28615-2, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 28615-2 with NSN 5930-01-051-3059, 5930010513059

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-01-051-3059

Item PartTypeName:

SWITCH,CODE INDICATING WHEEL

59300105130590P
CIICHCCESDPMICCriticalityENAC
U G
Part NumberISCRNVCRNCCHCCMSDSSADC
169315-8623

Characteristics Data of NSN 5930-01-051-3059, 5930010513059

MRCCriteriaCharacteristic
ABFEHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTIONMOISTURE RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT
ABHPOVERALL LENGTH1.730 INCHES MINIMUM AND 1.790 INCHES MAXIMUM
ABKWOVERALL HEIGHT1.543 INCHES NOMINAL
ABMKOVERALL WIDTH1.120 INCHES MINIMUM AND 1.180 INCHES MAXIMUM
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.100 INCHES NOMINAL SINGLE MOUNTING FACILITY
AFBHINDIVIDUAL SECTION QUANTITY2
AFDSLONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS1.585 INCHES MINIMUM AND 1.595 INCHES MAXIMUM SINGLE MOUNTING FACILITY
AFDVLONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS0.895 INCHES MINIMUM AND 0.905 INCHES MAXIMUM SINGLE MOUNTING FACILITY
AFGAOPERATING TEMP RANGE-40.0 TO 71.0 DEG CELSIUS
AXGYMOUNTING METHODBRACKET AND UNTHREADED HOLE SINGLE MOUNTING FACILITY
AYDWACTUATOR TYPELEVER ALL ACTUATORS
CQMKCONTACT VOLTAGE RATING IN VOLTS28.0 DC AT SEA LEVEL
CQYJMOUNTING FACILITY PATTERNFOUR POSITION RECTANGULAR SINGLE MOUNTING FACILITY
CRJHSWITCH ACTUATOR INDEXING POSITION QUANTITY10 ALL ACTUATORS
CSCFTERMINAL TYPEPRINTED CIRCUIT
CTHFCONTACT LOAD CURRENT RATING50.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL
CTZFREADOUT INDICATOR MARKING0,1,2,3,4,5,6,7,8,9 EACH SECTION
CTZTCONTACT ARRANGEMENT TRUTH TABLEBCD COMPLEMENT ONLY,1 POLE-10 POSITIONS EACH SECTION
HUESCOLORBLACK EACH BODY
PMLCPRECIOUS MATERIAL AND LOCATIONPRINTED CIRCUIT BOARD CIRCUIT SURFACES GOLD
PRMTPRECIOUS MATERIALGOLD
STYLSTYLE DESIGNATORRECTANGULAR INLINE INDICATING

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536509065 (NAICS 335931) Switches, for a voltage not exceeding 1000 volts, nesoi
SITC : 77255 Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top