Buy D.5-104D Capacitor Fixed Met part by Electron Products Inc

Part Number:  D.5-104D
Alternate P/N:  D.5104D
Manufacturer:  electron products inc
NIIN:  013328362
Item Name :  capacitor fixed met
CAGE Code:  99515
INC Code:  31959
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for D.5-104D (described as Capacitor Fixed Met), manufactured by Electron Products Inc with CAGE code 99515. This part is registered under NSN 5910-01-332-8362, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5910 Capacitors. Our verification process will confirm traceability through supporting identifiers including NIIN 01-332-8362, NCB code 01 (origin: USA), and INC 31959. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your D.5-104D requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for D.5-104D

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part D.5-104D, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number D.5-104D with NSN 5910-01-332-8362, 5910013328362

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5910-01-332-8362

Item PartTypeName:

CAPACITOR,FIXED,METALLIZED,PAPER

59100133283620P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
D.5-104D523

Characteristics Data of NSN 5910-01-332-8362, 5910013328362

MRCCriteriaCharacteristic
CBBLFEATURES PROVIDEDHERMETICALLY SEALED CASE
CQWMNONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION500.0 DC SINGLE SECTION
CWPMDISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT1.000
AEBTTERMINAL DIAMETER0.025 INCHES NOMINAL
CQJJNONDERATED OPERATING TEMP-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM
CWPKINSULATION RESISTANCE AT REFERENCE TEMP30000.0 MEGOHMS
CWSGTERMINAL SURFACE TREATMENTSOLDER
ADATBODY WIDTH0.270 INCHES NOMINAL
ADAUBODY HEIGHT0.400 INCHES NOMINAL
CRTPTOLERANCE RANGE PER SECTION-5.00 TO 5.00 PERCENT SINGLE SECTION
CWJKCASE MATERIALPLASTIC
AAQLBODY STYLEW/O MTG FACILITIES,TERMINALS ON OPPOSITE SURFACES
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABJTTERMINAL LENGTH1.500 INCHES NOMINAL
ADAQBODY LENGTH0.650 INCHES NOMINAL
AEBZSCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
CQBQCAPACITANCE VALUE PER SECTION0.100 MICROFARADS SINGLE SECTION
CWSSDIELECTRIC MATERIALPLASTIC POLYETHYLENE TEREPHTHALATE
TTQYTERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8532290040 (NAICS 334416) Fixed capacitors, nesoi
SITC : 77867 Fixed capacitors, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061400 - Condensers/parts noi/capacitors
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top