Buy 7632-003 Filter Band Pass Lo part by Electronic Precision Circuitry Inc

Part Number:  7632-003
Alternate P/N:  7632003
NIIN:  000783252
Item Name :  filter band pass lo
CAGE Code:  33791
INC Code:  60471
Country:  USA
NCB Code:  00

We've received your request for 7632-003 (described as Filter Band Pass Lo), manufactured by Electronic Precision Circuitry Inc with CAGE code 33791. This part is registered under NSN 5915-00-078-3252, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-078-3252, NCB code 00 (origin: USA), and INC 60471. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 7632-003 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 7632-003

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 7632-003, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 7632-003 with NSN 5915-00-078-3252, 5915000783252

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5915-00-078-3252

Item PartTypeName:

FILTER,BAND PASS-LOW PASS

59150007832520P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
43006010-003223

Characteristics Data of NSN 5915-00-078-3252, 5915000783252

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH3.160 INCHES NOMINAL
ADAQBODY LENGTH2.630 INCHES NOMINAL
ADATBODY WIDTH1.560 INCHES NOMINAL
ADAUBODY HEIGHT1.870 INCHES NOMINAL
AEBYDISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH2.125 INCHES NOMINAL
AECRVIBRATION RESISTANCE RANGE IN HERTZ10.0 TO 55.0
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.562 INCHES NOMINAL
AFGAOPERATING TEMP RANGE-55.0 TO 65.0 DEG CELSIUS
AFSVAVERAGE LIFE RATING IN HOURS10000.0
AHAJREFERENCE FREQUENCY PER FUNCTION382.0 HERTZ SINGLE LOW PASS 2ND FUNCTION
AHAJREFERENCE FREQUENCY PER FUNCTION766.50 HERTZ SINGLE BAND PASS 1ST FUNCTION
AHAQSOURCE IMPEDANCE RATING PER FUNCTION1.2 KILOHMS SINGLE BAND PASS 1ST FUNCTION
AHAQSOURCE IMPEDANCE RATING PER FUNCTION1.2 KILOHMS SINGLE LOW PASS 2ND FUNCTION
AHASLOAD IMPEDANCE PER FUNCTION2.4 KILOHMS SINGLE BAND PASS 1ST FUNCTION
AHASLOAD IMPEDANCE PER FUNCTION2.4 KILOHMS SINGLE LOW PASS 2ND FUNCTION
AHAUINPUT IMPEDANCE PER FUNCTION W/LOAD50.0 OHMS BLANK
AHAVOUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT50.0 OHMS BLANK
AHBLPRINCIPAL CIRCUITRY TYPE PER FUNCTIONINDUCTANCE-CAPACITANCE SINGLE LOW PASS 2ND FUNCTION
AHBLPRINCIPAL CIRCUITRY TYPE PER FUNCTIONINDUCTANCE-CAPACITANCE-RESISTANCE SINGLE BAND PASS 1ST FUNCTION
AKEJMOUNTING FACILITY SCREW THREAD SERIES DESIGNATORUNC
AKNAINCLOSURE TYPEENCASED
AXHRMOUNTING FACILITY TYPE AND QUANTITY2 THREADED HOLE
CQDRINSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS3.0 SINGLE BAND PASS 2ND FUNCTION
CQDRINSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS6.0 SINGLE BAND PASS 1ST FUNCTION
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 STANDARD TUBE BASE OUTPUT 2ND FUNCTION
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 WIRE HOOK GROUND 3RD FUNCTION
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY2 WIRE HOOK INPUT 1ST FUNCTION
CQFCSPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION1.00 HERTZ SINGLE LOW PASS AND 765.00 HERTZ SINGLE LOW PASS AND 1.53 KILOHERTZ SINGLE LOW PASS AND 2.06 KILOHERTZ SINGLE LOW PASS
CQJXNOMINAL THREAD SIZE0.138 INCHES
CQRGBODY MATERIALMETAL
CRBBFREQUENCY BAND WIDTH PER FUNCTION1.00 HERTZ SINGLE LOW PASS AND 765.00 HERTZ SINGLE LOW PASS 2ND FUNCTION
CRBBFREQUENCY BAND WIDTH PER FUNCTION7.265 KILOHERTZ SINGLE BAND PASS AND 8.065 KILOHERTZ SINGLE BAND PASS 1ST FUNCTION
CRBCDISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS3.0 MAXIMUM BLANK AND 50.0 MINIMUM BLANK 1ST FUNCTION
STYLSTYLE DESIGNATORRECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES

Schedule B & Trade

End Use : 41210 Stereo equipment, etc.
Schedule B : 8527995030 (NAICS 334310) Reception apparatus, nesoi
SITC : 76289 Radiobroadcast receivers, not combined with sound recording or reproducing apparatus nor with a clock, etc., n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Q22rhx-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061400 - Condensers/parts noi/capacitors
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 657 - Instruments, electric meter

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top