We've received your request for 110-2076 (described as Lathe Engine), manufactured by Enco Mfg Co with CAGE code 0GV04. This part is registered under NSN 3416-01-390-4591, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-390-4591, NCB code 01 (origin: USA), and INC 03137. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 110-2076 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| MRC | Criteria | Characteristic |
|---|---|---|
| BTSZ | SPINDLE SPEED QUANTITY | 18 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 60.0 TO 1550.0 |
| BTTD | RATED SWING | 12.000 INCHES NOMINAL |
| BTTF | ACTUAL SWING OVER BED | 12.000 INCHES NOMINAL |
| BTTG | SWING OVER CROSS SLIDE | 7.500 INCHES NOMINAL |
| BTWB | THREAD CHANGE QUANTITY | 40 |
| BTWM | HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 5 MORSE |
| BTYN | HOLLOW SPINDLE HOLE SIZE | 1.500 INCHES NOMINAL |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 1.500 |
| ELEC | VOLTAGE IN VOLTS | 110.0 AND 220.0 |
| ACDC | CURRENT TYPE | AC |
| FAAZ | PHASE | SINGLE |
| AKSL | PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 CABINET STAND; 1 6 IN. 3-JAW CHUCK; 1 8 IN. 4-CHUCK; 1 4-POSITION TOOLPOST; 2 CENTERS; 1 CHIP PAN; 1 SET OF CHANGE GEARS; 1 FACEPLATE; 1 STEADY REST; 1 FOLLOWREST; 1 TOOL KIT |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYW | GEAR CHANGE TYPE | QUICK |
| AWHA | BED TYPE | PERMANENT GAP |
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| FEAT | SPECIAL FEATURES | ELECTRO-MAGNETIC STARTER SWITCH; D1-4 SPINDLE WITH 1 9/16 IN. BORE; REINFORCED CROSS RIBS; HARDENED AND GROUND BED; HEADSTOCK WITH TAPERED ROLLER BEARINGS; SWING IN GAP 17 IN.; CROSS SLIDE TRAVEL 5 1/2 IN.; COMPOUND REST TRAVEL 3 1/4 IN.; TAILSTOCK SPINDLE TRAVEL 3 3/4 IN.; TAILSTOCK TAPER 3 MORSE TAPER; 29 METRIC THREAD CHANGES 0.2MILLIMETERS TO 4.5 MILLIMETERS |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AAXX | MOUNTING TYPE | BENCH |
| APGF | DESIGN TYPE | SCREW |
| BTWL | HEADSTOCK DRIVE TYPE | GEARED HEAD |
| ADQR | CENTER TO CENTER DISTANCE | 36.000 INCHES NOMINAL |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 1.500 INCHES NOMINAL |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTZR | THREAD QUANTITY RANGE | 4.0 TO 112.0 PER INCH |
| End Use : 21120 | Metalworking machine tools |
|---|---|
| Schedule B : 8458190030 (NAICS 333517) | Horizontal lathes, metal removing, except numerically controlled, engine or toolroom type, valued $3, 025 and over each, new |
| SITC : 73137 | Horizontal lathes, other than numerically controlled, for removing metal |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| HMIC | N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| PMIC | A - Item does not contain precious metal. |
| AAC | Y |
|---|---|
| Classification Control | U |
| MGMT_CTL | ------- |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 131670 - Tools pwr o/t pwr hnd tools |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72E - Engineer and material handling equipment, test/tool sets and equipment |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
