Buy 52B1808-1 Pin Grooved Headed part by Engineered Arresting Systems

Part Number: 52B1808-1

Alternate P/N: 52B18081

Manufacturer: engineered arresting systems

NSN: 5315-00-936-6390

NIIN: 009366390

Item Name : pin grooved headed

CAGE Code: 21439

FSC: 5315 Nails Keys and Pins

INC Code: 02382

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for 52B1808-1 (described as Pin Grooved Headed), manufactured by Engineered Arresting Systems with CAGE code 21439. This part is registered under NSN 5315-00-936-6390, classified in FSG 53 Hardware and Abrasives / FSC 5315 Nails Keys and Pins. Our verification process will confirm traceability through supporting identifiers including NIIN 00-936-6390, NCB code 00 (origin: USA), and INC 02382. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 52B1808-1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 52B1808-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 52B1808-1, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 52B1808-1 with NSN 5315-00-936-6390, 5315009366390

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5315-00-936-6390 Item PartTypeName: PIN,GROOVED,HEADED	5315	009366390	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
52B1808-1	6	2	5

Characteristics Data of NSN 5315-00-936-6390, 5315009366390

MRC	Criteria	Characteristic
AAGZ	FIRST END STYLE	CHAMFERED
AASK	HEAD STYLE	ROUND W/WRENCH FLATS
ABMZ	DIAMETER	0.870 INCHES NOMINAL
ABNZ	EFFECTIVE LENGTH	1.625 INCHES NOMINAL
ABPA	UNDERCUT DIAMETER	0.063 INCHES NOMINAL
ABPB	UNDER HEAD LENGTH	2.250 INCHES NOMINAL
ASDB	WIDTH ACROSS FLATS	1.500 INCHES NOMINAL
CQFM	HARDNESS RATING	41.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
CRRG	PIN HEAD DIAMETER	1.750 INCHES NOMINAL
CSYM	SURFACE FINISH	125.0 MICROINCHES HEAD OUTSIDE DIAMETER
CSYM	SURFACE FINISH	125.0 MICROINCHES UNDERCUT
CSYM	SURFACE FINISH	63.0 MICROINCHES OUTSIDE DIAMETER
FEAT	SPECIAL FEATURES	O/A LG 2.625 IN.; SURFACE TEXTURE PER ANSIB46.1; HEAT TREAT TO 190,000 TO 200,000 PSI PER MIL-H-6875; U/O P/NS 62D35561 AND 7545535
HGTH	HEIGHT	0.375 INCHES NOMINAL
MATT	MATERIAL	STEEL COMP 4340 OR STEEL COMP 4140 OVERALL
SFTT	SURFACE TREATMENT	CADMIUM OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYL	STYLE DESIGNATOR	GROOVE

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	Sf9sx-n
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	095190 - Hardware, noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware