Buy 315-051S2H0-809C Capacitor Fixed Ceramic Dielectric part by Erie Specialty Products Inc

Part Number:  315-051S2H0-809C
Alternate P/N:  315051S2H0809C
Manufacturer:  erie specialty products inc
NIIN:  006833005
CAGE Code:  72982
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 315-051S2H0-809C (described as Capacitor Fixed Ceramic Dielectric), manufactured by Erie Specialty Products Inc with CAGE code 72982. This part is registered under NSN 5910-00-683-3005, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5910 Capacitors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-683-3005, NCB code 00 (origin: USA), and INC . Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 315-051S2H0-809C requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 315-051S2H0-809C

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 315-051S2H0-809C, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 315-051S2H0-809C with NSN 5910-00-683-3005, 5910006833005

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5910-00-683-3005

Item Description:

CAPACITOR,FIXED,CERAMIC DIELECTR

59100068330050P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
315-051S2H0-809C395

Characteristics Data of NSN 5910-00-683-3005, 5910006833005

MRCCriteriaCharacteristic
CRTPTOLERANCE RANGE PER SECTION-0.25/+0.25 PICOFARADS SINGLE SECTION
CWJKCASE MATERIALCERAMIC
CWSGTERMINAL SURFACE TREATMENTSOLDER
SR-1DEFINITIVE GOVERNMENT SPEC/STD REFERENCE OR MANUFACTURERS CODEMILC20
CQLZTEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS-330.0 SINGLE SECTION
CQWMNONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION500.0 DC SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD
TESTTEST DATA DOCUMENT81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
CRHDTOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS-60.0 TO 60.0 SINGLE SECTION
CQBFINSULATION RESISTANCE AT MAXIMUM OPERATING TEMP1000.0 MEGOHMS
ABJTTERMINAL LENGTH1.250 INCHES MINIMUM
CQBQCAPACITANCE VALUE PER SECTION8.000 PICOFARADS SINGLE SECTION
ABHP(NON-CORE DATA) OVERALL LENGTH0.540 INCHES NOMINAL
ABKW(NON-CORE DATA) OVERALL HEIGHT0.225 INCHES NOMINAL
ABMK(NON-CORE DATA) OVERALL WIDTH0.225 INCHES NOMINAL
CWPKINSULATION RESISTANCE AT REFERENCE TEMP50000.0 MEGOHMS
SR-1SPEC/STD CONTROLLING DATA
CWQFQUALITY FACTOR AT REFERENCE TEMP550.0000
ABPMBODY DIAMETER0.225 INCHES NOMINAL
SR-1MANUFACTURERS CODE81349
ADAQBODY LENGTH0.540 INCHES NOMINAL
SR-1NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCEMILC20
SR-1DEFINITIVE GOVERNMENT SPEC/STD REFERENCECC21SH8R0C
CQJJNONDERATED OPERATING TEMP-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
AAQLBODY STYLEW/O MTG FACILITIES, AXIAL TERMINALS
AARGRELIABILITY INDICATORNOT ESTABLISHED
AEBZSCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8532290040 (NAICS 334416) Fixed capacitors, nesoi
SITC : 77867 Fixed capacitors, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061400 - Condensers/parts noi/capacitors
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top