Buy FNR 1R Bearing Unit Ball part by Federal Mogul Corporation

Part Number: FNR 1R

Manufacturer: federal mogul corporation

NSN: 3130-00-562-5905

NIIN: 005625905

Item Name : bearing unit ball

CAGE Code: 9K382

INC Code: 30556

Country: USA

NCB Code: 00

We've received your request for FNR 1R (described as Bearing Unit Ball), manufactured by Federal Mogul Corporation with CAGE code 9K382. This part is registered under NSN 3130-00-562-5905, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-562-5905, NCB code 00 (origin: USA), and INC 30556. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your FNR 1R requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for FNR 1R

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part FNR 1R, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number FNR 1R with NSN 3130-00-562-5905, 3130005625905

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3130-00-562-5905 Item PartTypeName: BEARING UNIT,BALL	3130	005625905	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
06948-5F	3	2	5

Characteristics Data of NSN 3130-00-562-5905, 3130005625905

MRC	Criteria	Characteristic
ABKG	BOLT CIRCLE DIAMETER	2.7500 INCHES NOMINAL
ABKU	FLANGE THICKNESS	0.6250 INCHES NOMINAL
ABTB	MOUNTING HOLE DIAMETER	0.4688 INCHES NOMINAL
ABXV	BORE DIAMETER	1.0000 INCHES NOMINAL
AFWD	HOUSING LENGTH	1.1875 INCHES NOMINAL
AFWE	HOUSING WIDTH	3.7500 INCHES NOMINAL
AGKL	LUBRICATION FITTING TYPE	HYDRAULIC
AGYX	ROLLING ELEMENT GROOVE QUANTITY	1
AGZA	ALIGNMENT TYPE	SELF-ALIGNING
AGZH	INTERNAL FIT-UP DESIGNATION	STANDARD
AHZC	ASSEMBLY OVERALL LENGTH	1.2188 INCHES NOMINAL
AKRF	SEAL TYPE	LABYRINTH
AMCL	BLOCK TYPE	FIXED
ANJS	SHAFT END TYPE	OPEN
ANKF	SEAL LOCATION	BOTH ENDS
ANKH	COLLAR LOCATION	ONE END
ANKK	LOAD CAPABILITY TYPE	RADIAL
CBBL	FEATURES PROVIDED	GROUND ROLLING ELEMENT GROOVE
CWGR	LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE	90.0 DEGREES NOMINAL
CWGY	ROTATING ELEMENT LOCKING METHOD	SETSCREW LOCKING COLLAR
CWJW	MOUNTING HOLE TYPE	ROUND,UNTHREADED
LBMA	LUBRICATION MATERIAL	GREASE
MATT	MATERIAL	IRON CAST HOUSING
MATT	MATERIAL	STEEL AND WOOL SEAL
STYL	STYLE DESIGNATOR	FLANGE BLOCK

Schedule B & Trade

End Use : 21180	Industrial machines, other
Schedule B : 8482991050 (NAICS 332991)	Parts, except inner and outer races, for ball bearings, (including ball bearings with integral shafts)
SITC : 74699	Parts of ball and roller bearings, n.E.S.

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	T2200x-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	114820 - Bearings/bushings noi ball/roller
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	742 - Bearings