Buy 00F586 Forming Machine She part by Federal Specifications

Part Number: 00F586

Manufacturer: federal specifications

NSN: 3441-00-242-3875

NIIN: 002423875

Item Name : forming machine she

CAGE Code: 81348

INC Code: 05511

Country: USA

NCB Code: 00

We've received your request for 00F586 (described as Forming Machine She), manufactured by Federal Specifications with CAGE code 81348. This part is registered under NSN 3441-00-242-3875, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-242-3875, NCB code 00 (origin: USA), and INC 05511. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 00F586 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 00F586

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 00F586, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 3441-00-242-3875, 3441002423875

MRC	Criteria	Characteristic
ANCY	HORSEPOWER RATING	5.000
ACDC	CURRENT TYPE	AC
APHE	OPERATION METHOD	POWER
ATPZ	ROLL DIAMETER	6.000 INCHES NOMINAL
CHRR	METAL THICKNESS ACCOMMODATED	0.156 IN.
CHRS	WORKING WIDTH	96.000 INCHES NOMINAL
CHRW	ROLL ADJUSTMENT METHOD	HAND
AAXX	MOUNTING TYPE	FLOOR
ZZZW	DEPARTURE FROM CITED DOCUMENT	RPLW AND FEAT
ATJK	POWER SOURCE	ELECTRIC MOTOR
FEAT	SPECIAL FEATURES	FUNGUS TREATMENT,RADIO INTERFERENCE SUPRESSION,AND 4-WIRE CORD AND A 4-PRONG POLARIZED PLUG ARE REQUIRED
ELEC	VOLTAGE IN VOLTS	208.0
FAAZ	PHASE	THREE
BGSH	POWER UNIT	INCLUDED
FREQ	FREQUENCY IN HERTZ	60.0
AKYN	FURNISHED ITEMS AND QUANTITY	CONE-ROLLING ATTACHMENT 1,TWO ROLL DRIVE 1

Schedule B & Trade

End Use : 21120	Metalworking machine tools
Schedule B : 8462290040 (NAICS 333517)	Bending rolls, metal forming, except numerically controlled, valued $3, 025 and over, new
SITC : 73313	Machines, bending, folding, straightening or flattening metal (including presses), other than numerically controlled

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	-------
Quantity per pack	1
Repariability	If condemned or uneconomically repairable , then dispose at direct support (ds) level.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	M - 85.0
LTL:	M - 85.0
NMFC:	126720 - Plate/sheet mtl bending machs
SHC:	R - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	72E - Engineer and material handling equipment, test/tool sets and equipment