Buy FFS92TYPE1STYLE1S Screw Machine part by Federal Specifications

Part Number: FFS92TYPE1STYLE1S

Manufacturer: federal specifications

NSN: 5305-00-012-0910

NIIN: 000120910

Item Name : screw machine

CAGE Code: 81348

FSC: 5305 Screws

INC Code: 06657

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for FFS92TYPE1STYLE1S (described as Screw Machine), manufactured by Federal Specifications with CAGE code 81348. This part is registered under NSN 5305-00-012-0910, classified in FSG 53 Hardware and Abrasives / FSC 5305 Screws. Our verification process will confirm traceability through supporting identifiers including NIIN 00-012-0910, NCB code 00 (origin: USA), and INC 06657. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your FFS92TYPE1STYLE1S requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for FFS92TYPE1STYLE1S

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part FFS92TYPE1STYLE1S, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number FFS92TYPE1STYLE1S with NSN 5305-00-012-0910, 5305000120910

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-00-012-0910 Item PartTypeName: SCREW,MACHINE	5305	000120910		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
11171-47-190	1	2	5

Characteristics Data of NSN 5305-00-012-0910, 5305000120910

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.750 INCHES MAXIMUM
AASB	FASTENER LENGTH	0.750 INCHES NOMINAL
AASK	HEAD STYLE	ROUND
AASL	HEAD DIAMETER	0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM
AASU	HEAD HEIGHT	0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM
ABQZ	INTERNAL DRIVE STYLE	SLOT
AHYM	NOMINAL THREAD DIAMETER	0.190 INCHES
CMLP	THREAD QUANTITY PER INCH	24
CYAU	SCREW MATERIAL	STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
CYAW	SCREW MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-633 FED SPEC ALL MATERIAL RESPONSES
CYBA	SCREW SURFACE TREATMENT	CADMIUM OR ZINC
THSD	THREAD SERIES DESIGNATOR	UNC
ZZZT	NONDEFINITIVE SPEC/STD DATA	1S STYLE AND I TYPE