Buy FF-H-1819 Lock Set Rim part by Federal Specifications

Part Number: FF-H-1819

Alternate P/N: FFH1819

Manufacturer: federal specifications

NSN: 5340-00-264-7598

NIIN: 002647598

Item Name : lock set rim

CAGE Code: 81348

INC Code: 07844

Country: USA

NCB Code: 00

We've received your request for FF-H-1819 (described as Lock Set Rim), manufactured by Federal Specifications with CAGE code 81348. This part is registered under NSN 5340-00-264-7598, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-264-7598, NCB code 00 (origin: USA), and INC 07844. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your FF-H-1819 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for FF-H-1819

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part FF-H-1819, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number FF-H-1819 with NSN 5340-00-264-7598, 5340002647598

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-00-264-7598 Item PartTypeName: LOCK SET,RIM	5340	002647598	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
A-A-1932	6	9	5

Characteristics Data of NSN 5340-00-264-7598, 5340002647598

MRC	Criteria	Characteristic
ABNM	THICKNESS	1.375 INCHES MINIMUM AND 2.000 INCHES MAXIMUM DOOR
APGF	DESIGN TYPE	LATCH BOLT
BTJY	BOLT TYPE	REGULAR BEVEL
CHLZ	LOCKING MECHANISM TYPE	PIN TUMBLER
FEAT	SPECIAL FEATURES	COMPONENT AND QTY:KEEPER 1,ROSE 1;LATCH BOLT OPERATION METHOD:OUTSIDE KEY AND INSIDE THUMB KNOB;RELEASE BAR:NOT INCLUDED;BACKSET DEPTH:2.375 IN.NOM;KEY CHANGE QTY:UNLIMITED;MASTER KEY PROVISION:NOT INCLUDED;FURNISHED MTG HARDWARE:SCREWS
MATT	MATERIAL	COPPER ALLOY CASE

Schedule B & Trade

End Use : 41050	Cell phones and other household goods, n.E.C.
Schedule B : 8301406030 (NAICS 332510)	Door locks, locksets and other base metal locks suitable for use with interior or exterior doors (exc garage, overhead or sliding doors)
SITC : 69911	Padlocks and locks (key, combination etc.), clasps and frames with clasps and locks, of base metal; keys for the foregoing articles, of base metal

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	V
Classification Control	U
MGMT_CTL	E2200x-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Gsa
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	Q - 70.0
NMFC:	095760 - Locks/lock sets noi metal in bbl/bx
SHC:	5 - Low sensitivity, category iv, aa&e, unclassified
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware