We've received your request for GGD600 (described as Compass Drafting Pi), manufactured by Federal Specifications with CAGE code 81348. This part is registered under NSN 6675-00-174-0516, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-174-0516, NCB code 00 (origin: USA), and INC 04363. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your GGD600 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| MRC | Criteria | Characteristic |
|---|---|---|
| MATL | MATERIAL | ANY ACCEPTABLE |
| BBSJ | ARC | NOT INCLUDED |
| SR-1 | MANUFACTURERS CODE | 81348 |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | GG-D-600,PARAGRAPH 3.9.1.1.2,COMPASS PENCIL |
| BBSS | POINT NAME AND QUANTITY | NEEDLE,1 |
| BBMP | KNEE JOINT | NOT INCLUDED |
| BBSG | ADJUSTMENT SCREW LOCATION | CENTER |
| BBSH | STRAIGHTENING DEVICE | NOT INCLUDED |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | GGD600 |
| APQB | UNIT TYPE | SPRING-BOW |
| AFJU | CARRYING CASE | PROVIDED |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | LEAD HOLDER,1 |
| ABHP | OVERALL LENGTH | 3.500 INCHES MINIMUM AND 4.500 INCHES MAXIMUM |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| BBSF | LEG SHAPE | FLAT OR SQUARE |
| End Use : 21160 | Measuring, testing, control instruments |
|---|---|
| Schedule B : 9017208060 (NAICS 334519) | Drawing, marking-out or mathematical calculating instruments, nesoi |
| SITC : 87422 | Drafting tables and machines, whether or not automatic, and other drawing, marking-out or mathematical calculating instruments |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | J2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | F - 150.0 |
| NMFC: | 058010 - Magnetic compasses in boxes |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 653 - Musical instruments |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
