We've received your request for EL1-PM (described as Fuseholder Extracto), manufactured by Fic Corporation with CAGE code 84613. This part is registered under NSN 5920-00-802-0666, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-802-0666, NCB code 00 (origin: USA), and INC 28909. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your EL1-PM requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5920-00-802-0666 Item PartTypeName: FUSEHOLDER,EXTRACTOR POST | 5920 | 008020666 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | S | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 303D13653-108 | 3 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PANEL MOUNTED TYPE |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| ADAV | OVERALL DIAMETER | 1.312 INCHES NOMINAL |
| AFRG | CONTACT MATERIAL | BRONZE |
| AFRH | CONTACT SURFACE TREATMENT | SILVER PLATED |
| AFXH | INTERRUPTION INDICATOR METHOD | NEON LAMP |
| AGUE | FUSE ACCOMMODATION QUANTITY | 1 |
| AGUJ | ACCOMMODATED FUSE LENGTH | 1.500 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| CQJL | CURRENT CARRYING RATING IN AMPS | 20.0 |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| ELEC | VOLTAGE IN VOLTS | 125.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 THREADED STUD |
| AAFZ | BODY MATERIAL | PLASTIC,PHENOLIC,MOULDED |
| ABHP | OVERALL LENGTH | 3.938 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.166 INCHES MINIMUM AND 0.176 INCHES MAXIMUM |
| ADZC | ENVIRONMENTAL PROTECTION | SHOCK PROOF AND VIBRATION PROOF |
| AEVB | MOUNTING HOLE STYLE | BUSHING MOUNTING W/2 HOLES AND KEYWAY |
| AGUK | ACCOMMODATED FERRULE DIAMETER | 0.406 INCHES NOMINAL |
| AGUT | LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | 1.001 INCHES NOMINAL |
| AGUV | CAP DIAMETER | 0.683 INCHES NOMINAL |
| AGVA | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | 1.124 INCHES NOMINAL |
| AGVB | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | 1.125 INCHES NOMINAL |
| AGVF | BUSHING HOLE DIAMETER | 1.000 INCHES NOMINAL |
| AGVM | CENTER TO CENTER DISTANCE BETWEEN KEYWAY AND BUSHING HOLE | 0.562 INCHES NOMINAL |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 36.0 |
| End Use : 20005 | Electric apparatus |
|---|---|
| Schedule B : 8548900100 (NAICS 335999) | Electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85 |
| SITC : 77813 | Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, etc; electric parts of mach or apps, nes |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | S - Item contains silver. |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | Q2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 061680 - Elec wiring plugs etc |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 658 - Electrical appliances, small |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
