Buy 10A2235A Meter Flow Rate Indicating part by Fischer And Porter Co

Part Number: 10A2235A

Manufacturer: fischer and porter co

NSN: 6680-00-061-8039

NIIN: 000618039

Item Name : meter flow rate indicating

CAGE Code: 22375

FSC: 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments

INC Code: 38346

Country: USA

NCB Code: 00

FSG: 66 Instruments And Laboratory Equipment

We've received your request for 10A2235A (described as Meter Flow Rate Indicating), manufactured by Fischer And Porter Co with CAGE code 22375. This part is registered under NSN 6680-00-061-8039, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 00-061-8039, NCB code 00 (origin: USA), and INC 38346. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 10A2235A requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 10A2235A

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 10A2235A, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6680-00-061-8039, 6680000618039

MRC	Criteria	Characteristic
ARQS	Construction	OPEN FRONT
ASTW	Scale Marking	GPM
BJDM	Float Material	BRASS
AHZU	Integral Relief Valve	NOT INCLUDED
APSJ	Scale Quantity	1
ATEQ	Scale Type	DIRECT CAPACITY READING
ABHP	Overall Length	5.750 INCHES NOMINAL
AWGJ	Tube Material	GLASS
ACKL	Media For Which Designed	WATER
AWAE	Float Quantity	1
CPZF	Metering Tube Quantity	1
CPZM	Spinning Float	NOT INCLUDED
CPZP	Inlet Connection Position For Which Designed	VERTICAL
CPZJ	Dial Scale Smallest Increment	0.20GPM
CPZK	Dial Scale Reference Pointer	NOT INCLUDED
CPZR	Outlet Connection Position For Which Designed	VERTICAL
CPZT	Alarm Signal	INCLUDED
BPHD	Maximum Working Pressure	175.0 POUNDS PER SQUARE INCH
BNHN	Integral Heat Source	NOT INCLUDED
ANTH	Meter Type	FLOAT
AXQG	Carrying Handle	NOT INCLUDED
BHCM	Outlet Connection Size	1/2 IN. NPT
APGF	Design Type	CASE
BHBY	Dial Scale Marking Range	+1.0 TO 4.0
ARTH	Outlet Connection Type	THREADED
BHSQ	Float Type	FREE
ZZZY	Reference Number Differentiating Characteristics	APSJ,ATEQ,ACKL,ASTW,CPZG,CPZH,BHBY,AEWH,CPZJ,CPZK,AWAE,CPZL,BJDM,CPZM,BHSQ,BMHW,ABHP,ACQW,CPZD,CPZP,CPZQ,ARTH,BHCM,CPZR AND CPZS
MRC	Decoded Requirement	Clear Text Reply
CPZD	Inlet Connection Size	1/2 IN. NPT
CPZN	Integral Pulsation Dampener	NOT INCLUDED
BHJT	Base	NOT INCLUDED
AXGY	Mounting Method	DIRECT LINE
ACQW	Inlet Connection Type	THREADED
APQB	Unit Type	MOUNTED

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	M - 85.0
NMFC:	136940 - Meters liquid o/t flow noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	657 - Instruments, electric meter