Buy 573 1 2IN Valve Check part by Flowserve Corporation

Part Number:  573 1 2IN
Manufacturer:  flowserve corporation
NIIN:  012837152
Item Name :  valve check
CAGE Code:  63220
INC Code:  05487
Country:  USA
NCB Code:  01

We've received your request for 573 1 2IN (described as Valve Check), manufactured by Flowserve Corporation with CAGE code 63220. This part is registered under NSN 4820-01-283-7152, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-283-7152, NCB code 01 (origin: USA), and INC 05487. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 573 1 2IN requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 573 1 2IN

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 573 1 2IN, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 573 1 2IN with NSN 4820-01-283-7152, 4820012837152

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4820-01-283-7152

Item PartTypeName:

VALVE,CHECK

48200128371520N
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
573 1/2IN523

Characteristics Data of NSN 4820-01-283-7152, 4820012837152

MRCCriteriaCharacteristic
ADQUFLOW CONTROL DEVICEDISK
AECSBOLT HOLE QUANTITY4 ALL ENDS
AEHZMAXIMUM OPERATING TEMP100.0 DEG FAHRENHEIT 2ND RESPONSE
AEHZMAXIMUM OPERATING TEMP1000.0 DEG FAHRENHEIT 1ST RESPONSE
AQLRVALVE OPERATION METHODAUTOMATIC
ARKNFLANGE SHAPEROUND WITH HOLES ALL ENDS
AWLSCONNECTION TYPEFLANGE ALL ENDS
BBJXMOUNTING POSITIONHORIZONTAL
CCFGVALVE SIZE0.500 INCHES
CQGMMAXIMUM OPERATING PRESSURE20.0 POUNDS PER SQUARE INCH 1ST RESPONSE
CQGMMAXIMUM OPERATING PRESSURE285.0 POUNDS PER SQUARE INCH 2ND RESPONSE
CWCDNOMINAL OUTSIDE DIAMETER3.500 INCHES ALL ENDS
CWCFFACE TO FACE DISTANCE4.250 INCHES
CWCKNOMINAL THICKNESS0.438 INCHES ALL ENDS
CWCQBOLT HOLE NOMINAL DIAMETER0.625 INCHES ALL ENDS
CWCTBOLT CIRCLE NOMINAL DIAMETER2.375 INCHES ALL ENDS
CWDFFLANGE FACE DESIGNRAISED STRAIGHT ALL ENDS
CWDHRAISED FACE NOMINAL HEIGHT0.062 INCHES ALL ENDS
CWDLRAISED FACE NOMINAL DIAMETER1.375 INCHES ALL ENDS
FEATSPECIAL FEATURESPISTON CHECK TYPE; INTEGRAL HARD FACED SEAT; CONVENTIONAL PORT; CHROME TRIM
MATTMATERIALSTEEL UNS K03504 BODY
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONASTM A105 ASSN STD SINGLE MATERIAL RESPONSE BODY
MEDAMEDIA FOR WHICH DESIGNEDSTEAM 1ST RESPONSE
MEDAMEDIA FOR WHICH DESIGNEDWATER-OIL-GAS 2ND RESPONSE
STYLSTYLE DESIGNATORSTRAIGHT THRU FLANGED ENDS

Schedule B & Trade

End Use : 21180 Industrial machines, other
Schedule B : 8481302090 (NAICS 332911) Check valves of steel
SITC : 74730 Check valves

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL J2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 051080 - Faucets, bibcocks, gates valves
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 594 - Pumps and parts, (machinery and parts),(less than 35 feet)

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top