Buy 4804 Connector Plug Elec part by Fluke Electronics Corporation

Part Number:  4804
NIIN:  012602818
Item Name :  connector plug elec
CAGE Code:  4U744
INC Code:  01938
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 4804 (described as Connector Plug Elec), manufactured by Fluke Electronics Corporation with CAGE code 4U744. This part is registered under NSN 5935-01-260-2818, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 01-260-2818, NCB code 01 (origin: USA), and INC 01938. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 4804 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4804

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 4804, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 4804 with NSN 5935-01-260-2818, 5935012602818

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-01-260-2818

Item Description:

CONNECTOR,PLUG,ELECTRICAL

59350126028180P
CIICHCCESDPMICCriticalityENAC
U G
Part NumberISCRNVCRNCCHCCMSDSSADC
4804323

Characteristics Data of NSN 5935-01-260-2818, 5935012602818

MRCCriteriaCharacteristic
ADAVOVERALL DIAMETER0.312 INCHES NOMINAL
AFQRTHREADED DEVICE TYPECOUPLING FACILITY
AFQXCONTACT POSITION ARRANGEMENT STYLESMA SINGLE MATING END
AFRWCONNECTOR CABLE STRAIN RELIEF METHODCRIMP TYPE
CMLPTHREAD QUANTITY PER INCH36
CQJXNOMINAL THREAD SIZE0.250 INCHES
CQZGINSERT MATERIALPLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END
CSCFTERMINAL TYPECRIMP SINGLE MATING END SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD SINGLE MATING END SINGLE CONTACT GROUPING
ABHPOVERALL LENGTH0.690 INCHES NOMINAL
AFRTSHELL TYPESOLID
CSPTSHELL MATERIALSTEEL
CXCLINCLUDED CONTACT TYPECOAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING
PMWTPRECIOUS MATERIAL AND WEIGHT0.005 GOLD GRAINS, TROY
THSDTHREAD SERIES DESIGNATORUNS
CQTMTERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
ADZCENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND VIBRATION RESISTANT AND MOISTURE RESISTANT AND THERMAL SHOCK RESISTANT
CXCGINCLUDED CONTACT QUANTITY1 SINGLE MATING END SINGLE CONTACT GROUPING
AAJFTHREAD DIRECTIONRIGHT-HAND
AAJDTHREAD CLASS2B
AAQLBODY STYLESTRAIGHT SHAPE, INTERNAL COUPLING
AFQJCABLE ENTRANCE DIAMETER0.094 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
AFQWMATING END QUANTITY1
AFQZCONTACT REMOVABILITYREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRVCONNECTOR LOCKING METHODINTERNALLY THREADED COUPLING RING
AFRYRADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 SINGLE MATING END SINGLE CONTACT GROUPING
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CSWMSHELL SURFACE TREATMENTPASSIVATE
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PRMTPRECIOUS MATERIALGOLD

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536695050 (NAICS 335931) Electrical plugs & sockets, for a voltage not exceeding 1, 000 v, nesoi
SITC : 77258 Electric plugs and sockets, for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC D
Classification Control U
MGMT_CTL Q22rjx-
Quantity per pack 1
Repariability Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top