Buy GAD10044 Screw Machine part by Ford Motor Company

Part Number: GAD10044

Manufacturer: ford motor company

NSN: 5305-00-528-3526

NIIN: 005283526

Item Name : screw machine

CAGE Code: 57526

FSC: 5305 Screws

INC Code: 06657

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for GAD10044 (described as Screw Machine), manufactured by Ford Motor Company with CAGE code 57526. This part is registered under NSN 5305-00-528-3526, classified in FSG 53 Hardware and Abrasives / FSC 5305 Screws. Our verification process will confirm traceability through supporting identifiers including NIIN 00-528-3526, NCB code 00 (origin: USA), and INC 06657. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your GAD10044 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for GAD10044

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part GAD10044, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number GAD10044 with NSN 5305-00-528-3526, 5305005283526

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-00-528-3526 Item PartTypeName: SCREW,MACHINE	5305	005283526		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
99B10044	5	9	3

Characteristics Data of NSN 5305-00-528-3526, 5305005283526

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.719 INCHES MINIMUM
AASB	FASTENER LENGTH	0.875 INCHES NOMINAL
AASK	HEAD STYLE	FLAT COUNTERSUNK
AASL	HEAD DIAMETER	0.685 INCHES MINIMUM AND 0.700 INCHES MAXIMUM
ABQZ	INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
AHYM	NOMINAL THREAD DIAMETER	0.438 INCHES
CMLP	THREAD QUANTITY PER INCH	14
CRSQ	COUNTERSINK ANGLE	82.0 DEGREES NOMINAL
CYAU	SCREW MATERIAL	STEEL COMP 1010
CYAW	SCREW MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-630 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-631 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE
THSD	THREAD SERIES DESIGNATOR	UNC

Schedule B & Trade

End Use : 12110	Iron and steel products, other
Schedule B : 7318152000 (NAICS 332722)	Bolts and bolts and their nuts or washers exported in the same shipment
SITC : 69421	Screws, bolts, nuts, screw hooks, rivets, washers and similar articles, threaded, of iron or steel

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	U - 50.0
LTL:	W - Rating variable
NMFC:	093486 - Bolts, nuts or screws, noi (sub 3)
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware