Buy 71-811257-1 Washer Key part by General Dynamics Advanced

Part Number: 71-811257-1

Alternate P/N: 718112571

Manufacturer: general dynamics advanced

NSN: 5310-00-090-3875

NIIN: 000903875

Item Name : washer key

CAGE Code: 07397

FSC: 5310 Nuts and Washers

INC Code: 01869

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for 71-811257-1 (described as Washer Key), manufactured by General Dynamics Advanced with CAGE code 07397. This part is registered under NSN 5310-00-090-3875, classified in FSG 53 Hardware and Abrasives / FSC 5310 Nuts and Washers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-090-3875, NCB code 00 (origin: USA), and INC 01869. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 71-811257-1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 71-811257-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 71-811257-1, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 71-811257-1 with NSN 5310-00-090-3875, 5310000903875

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-00-090-3875 Item PartTypeName: WASHER,KEY	5310	000903875	0	N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
71-811257-1	5	9	3

Characteristics Data of NSN 5310-00-090-3875, 5310000903875

MRC	Criteria	Characteristic
AAUB	HOLE DIAMETER	6.764 INCHES MINIMUM AND 6.799 INCHES MAXIMUM
ABKV	OUTSIDE DIAMETER	7.508 INCHES MINIMUM AND 7.568 INCHES MAXIMUM
ABLF	EXTERNAL PREBENT KEY WIDTH	0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM
ABLK	INTERNAL PREBENT KEY WIDTH	0.714 INCHES NOMINAL
ABLQ	DISTANCE FROM CENTERLINE TO TOP OF INTERNAL KEY	3.140 INCHES NOMINAL
ABLX	OVERALL DISTANCE INCLUDING KEYS	8.532 INCHES MINIMUM AND 8.594 INCHES MAXIMUM
ABMQ	EXTERNAL KEY QUANTITY	19
ABPX	MATERIAL THICKNESS	0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
CSKN	EXTERNAL PREBENT KEY ANGLE	30.0 DEGREES NOMINAL
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
FEAT	SPECIAL FEATURES	INTERNAL KEY-STRAIGHT
MATT	MATERIAL	STEEL OVERALL
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYL	STYLE DESIGNATOR	KEY

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	U - 50.0
NMFC:	194160 - Washer or gaskets, iron or steel,
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware