We've received your request for 699B904P1 (described as Gasket), manufactured by General Dynamics Defense Systems with CAGE code 97993. This part is registered under NSN 5330-00-653-5830, classified in FSG 53 Hardware and Abrasives / FSC 5330 Packing and Gasket Materials. Our verification process will confirm traceability through supporting identifiers including NIIN 00-653-5830, NCB code 00 (origin: USA), and INC 04522. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 699B904P1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5330-00-653-5830 Item PartTypeName: GASKET | 5330 | 006535830 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 699B904P1 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION |
| AAUB | HOLE DIAMETER | 0.310 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 14.750 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 8.630 INCHES NOMINAL |
| ADPQ | INSIDE CORNER RADIUS | 0.500 INCHES NOMINAL |
| ADPW | OUTSIDE CORNER RADIUS | 0.750 INCHES NOMINAL |
| ADUE | APERTURE WIDTH | 7.130 INCHES NOMINAL |
| ADUF | APERTURE LENGTH | 13.250 INCHES NOMINAL |
| ADVM | CROSS-SECTIONAL THICKNESS | 0.062 INCHES NOMINAL |
| AECS | BOLT HOLE QUANTITY | 14 |
| CQFM | HARDNESS RATING | 35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL |
| FEAT | SPECIAL FEATURES | W/4 ADDITIONAL BOLT HOLES 0.310 IN. DIA 0.500 IN. FROM EDGE TO CENTER OF HOLE ALONG WIDTH AND LENGTH |
| MATT | MATERIAL | RUBBER SYNTHETIC OVERALL |
| STYL | STYLE DESIGNATOR | NON-CIRCULAR |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | T22sax- |
| Quantity per pack | No qup |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | P - 77.5 |
| LTL: | W - Rating variable |
| NMFC: | 194120 - Washers/gaskets/pckg dvcs noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
