We've received your request for TRX37-6N1 (described as Synchro Receiver Tr), manufactured by General Dynamics Global Imaging with CAGE code 10112. This part is registered under NSN 5990-00-852-2369, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5990 Synchros and Resolvers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-852-2369, NCB code 00 (origin: USA), and INC 27218. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your TRX37-6N1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-852-2369 Item PartTypeName: SYNCHRO,RECEIVER-TRANSMITTER | 5990 | 008522369 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10-1532 PIECE 37 | 3 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.3100 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 0.783 ROTOR TO STATOR NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-S-20708/74 GOVERNMENT SPECIFICATION |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 9.25 WATTS MAXIMUM |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | 7.00 MINIMUM AND 10.00 MAXIMUM |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | 30.00 MINIMUM AND 40.00 MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 5.0600 INCHES NOMINAL |
| TEST | TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI |
| AAFZ | BODY MATERIAL | STEEL,STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND DOUBLE FLANGE A |
| AAVH | SHOULDER DIAMETER | 3.3290 INCHES MINIMUM AND 3.3340 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 1.6250 INCHES NOMINAL |
| AAZW | SECOND SHOULDER DIAMETER | 3.3740 INCHES MINIMUM AND 3.3750 INCHES MAXIMUM |
| AAZX | SECOND SHOULDER LENGTH | 0.3750 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 5.9500 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 3.6240 INCHES MINIMUM AND 3.6250 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 3.3850 INCHES MINIMUM AND 3.3900 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2403 INCHES MINIMUM AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.7000 INCHES NOMINAL SINGLE SHAFT |
| AGRS | DISTANCE BETWEEN FLANGES | 1.8120 INCHES NOMINAL |
| AHCG | MAXIMUM TEMP RISE | 35.0 DEG CELSIUS |
| AJSL | BODY SIZE | 37 |
| AJSS | FREQUENCY IN HERTZ | 60.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 830.0 MILLIAMPERES MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 3.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 35.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 170.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -36.0 TO 36.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 0.900 INCH-OUNCES NOMINAL |
| AJWQ | PILOT LENGTH | 0.1600 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.6550 INCHES NOMINAL |
| AJWW | AFT OF SECOND FLANGE DIAMETER | 3.3740 INCHES MINIMUM AND 3.3750 INCHES MAXIMUM |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| End Use : 22220 | Marine engines, parts |
|---|---|
| Schedule B : 9014900000 (NAICS 334511) | Parts & accessories for direction finding compasses and other navigational instruments and appliances |
| SITC : 87412 | Parts and accessories of navigational instruments and appliances |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| HMIC | N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| PMIC | A - Item does not contain precious metal. |
| AAC | D |
|---|---|
| Classification Control | U |
| MGMT_CTL | Q2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 062120 - Generators/motors/parts noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 593 - Motors and parts, (machinery and parts),(less than 35 feet) |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
