Buy 15R4CMK4M0D3 Resolver Electrical part by General Dynamics Global Imaging

Part Number: 15R4CMK4M0D3

Manufacturer: general dynamics global imaging

NSN: 5990-00-910-1747

NIIN: 009101747

Item Name : resolver electrical

CAGE Code: 10112

FSC: 5990 Synchros and Resolvers

INC Code: 22966

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 15R4CMK4M0D3 (described as Resolver Electrical), manufactured by General Dynamics Global Imaging with CAGE code 10112. This part is registered under NSN 5990-00-910-1747, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5990 Synchros and Resolvers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-910-1747, NCB code 00 (origin: USA), and INC 22966. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 15R4CMK4M0D3 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 15R4CMK4M0D3

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 15R4CMK4M0D3, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 15R4CMK4M0D3 with NSN 5990-00-910-1747, 5990009101747

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-910-1747 Item PartTypeName: RESOLVER,ELECTRICAL	5990	009101747	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1474925	2	2	3

Characteristics Data of NSN 5990-00-910-1747, 5990009101747

MRC	Criteria	Characteristic
AAFZ	BODY MATERIAL	STEEL,CORROSION RESISTING
AAQL	BODY STYLE	STANDARD ROUND B
AAVH	SHOULDER DIAMETER	0.8750 INCHES NOMINAL
AAVL	PILOT DIAMETER	0.8750 INCHES NOMINAL
ABHP	OVERALL LENGTH	3.6890 INCHES MAXIMUM
ABKK	FLANGE DIAMETER	1.4370 INCHES NOMINAL
ABKU	FLANGE THICKNESS	0.0930 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.0780 INCHES NOMINAL
AJSL	BODY SIZE	15
AJSR	ROTOR INPUT VOLTAGE RATING IN VOLTS	26.0 NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJVM	SPLINE TOOTH QUANTITY	21 SINGLE SHAFT
AJVW	ALIGNMENT HOLE QUANTITY	4
AJWQ	PILOT LENGTH	0.0400 INCHES NOMINAL
AJWR	SHOULDER LENGTH	0.1170 INCHES NOMINAL
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	2.9610 INCHES MAXIMUM
AJXA	SPLINE TOOTH DIAMETRAL PITCH	120 SINGLE SHAFT
AJYY	SHAFT THREAD SERIES DESIGNATOR	UNC SINGLE SHAFT
AKAF	SHAFT THREAD DIRECTION	RIGHT-HAND SINGLE SHAFT
AKAN	SHAFT THREAD CLASS	2A SINGLE SHAFT
CQTM	TERMINAL LOCATION	REAR
CRSJ	SHAFT TYPE	SPLINE W/THREADS SINGLE SHAFT
CRSY	ALIGNMENT HOLE DEPTH	0.1250 INCHES NOMINAL
CTCW	ALIGNMENT HOLE BOLT CIRCLE DIAMETER	1.1000 INCHES NOMINAL
CWBH	SHAFT NOMINAL THREAD SIZE	0.1872 INCHES SINGLE SHAFT
TTQY	TERMINAL TYPE AND QUANTITY	5 WIRE LEAD

Schedule B & Trade

End Use : 21610	Medicinal equipment
Schedule B : 9018903000 (NAICS 339112)	Anesthetic instruments and appliances and parts and accessories
SITC : 87229	Instruments and appliances used in medical, surgical or veterinary sciences, n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	062120 - Generators/motors/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)