Buy 18M4BAE0H4 Motor Control part by General Dynamics Global Imaging

Part Number: 18M4BAE0H4

Manufacturer: general dynamics global imaging

NSN: 6105-00-435-7448

NIIN: 004357448

Item Name : motor control

CAGE Code: 10112

FSC: 6105 Motors Electrical

INC Code: 19258

Country: USA

NCB Code: 00

FSG: 61 Electric Wire and Power and Distribution Equipment

We've received your request for 18M4BAE0H4 (described as Motor Control), manufactured by General Dynamics Global Imaging with CAGE code 10112. This part is registered under NSN 6105-00-435-7448, classified in FSG 61 Electric Wire and Power and Distribution Equipment / FSC 6105 Motors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 00-435-7448, NCB code 00 (origin: USA), and INC 19258. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 18M4BAE0H4 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 18M4BAE0H4

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 18M4BAE0H4, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 18M4BAE0H4 with NSN 6105-00-435-7448, 6105004357448

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
6105-00-435-7448 Item PartTypeName: MOTOR,CONTROL	6105	004357448		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
18M4BAE0H4	2	2	3

Characteristics Data of NSN 6105-00-435-7448, 6105004357448

MRC	Criteria	Characteristic
AAJT	OVERALL HEIGHT	1.750 INCHES
AAJU	OVERALL LENGTH	2.652 INCHES
AAJV	OVERALL WIDTH	1.750 INCHES
AAUH	SPLINE MINOR DIAMETER	0.1562 INCHES NOMINAL SINGLE END
ABSA	SPLINE QUANTITY	15 SINGLE END
ABWV	SHAFT DIAMETER	0.177 INCHES NOMINAL SINGLE END
ACDC	CURRENT TYPE	AC INPUT
ANPZ	ENCLOSURE FEATURE	TOTALLY INCLOSED
AXFH	SPLINE LENGTH	0.4370 INCHES NOMINAL SINGLE END
AXGY	MOUNTING METHOD	FACE
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	1 CLAMP COLLAR AND 4 THREADED HOLE
BFMF	COOLING METHOD	NATURAL CONVECTION VENTILATED
BFMJ	CONTROL FIELD CURRENT RATING IN AMPS	1.300 AND 0.650
BFML	CONTROL FIELD WINDING TYPE	TWO WINDINGS,SERIES CONNECTED OR TWO WINDINGS,PARALLEL CONNECTED
BKPB	CURRENT RATING METHOD	NO LOAD
BKPH	TORQUE RATING AND TYPE	2.8 INCH-OUNCES STALLED
BKPQ	INCLOSURE SPECIFICATION	COMMERCIAL
BKPS	CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS	20.0 AC AND 40.0 AC
CBBL	FEATURES PROVIDED	HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION
CWCS	LENGTH OF SHAFT FROM HOUSING	0.438 INCHES SINGLE END
CWDY	TEMP RATING	-55.0 OPERATING DEG CELSIUS AND 125.0 OPERATING DEG CELSIUS
CWFQ	MOUNTING FACILITY CIRCLE DIAMETER	1.250 INCHES
CWFX	ROTOR SPEED RATING IN RPM	9800.0 SINGLE NO LOAD
CWGL	CURRENT RATING IN AMPS	0.245 SINGLE INPUT
CWGQ	CONNECTION TYPE AND VOLTAGE RATING IN VOLTS	115.0 LINE TO NEUTRAL SINGLE INPUT
CWHZ	SHAFT END CHARACTERISTIC	A14 SINGLE STYLE SINGLE END
FAAZ	PHASE	TWO INPUT
FREQ	FREQUENCY IN HERTZ	400.0 INPUT
TTQY	TERMINAL TYPE AND QUANTITY	6 SCREW AND 6 SOLDER LUG

Schedule B & Trade

End Use : 21100	Industrial engines
Schedule B : 8412809000 (NAICS 333618)	Engines and motors, nesoi
SITC : 71893	Power generating engines and motors, n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Y
Classification Control	U
MGMT_CTL	9g-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	S9g
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	062120 - Generators/motors/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)