Buy B00-18053 Synchro Control Tra part by General Dynamics Global Imaging

Part Number: B00-18053

Alternate P/N: B0018053

Manufacturer: general dynamics global imaging

NSN: 5990-00-781-9423

NIIN: 007819423

Item Name : synchro control tra

CAGE Code: 10112

INC Code: 15289

Country: USA

NCB Code: 00

We've received your request for B00-18053 (described as Synchro Control Tra), manufactured by General Dynamics Global Imaging with CAGE code 10112. This part is registered under NSN 5990-00-781-9423, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-781-9423, NCB code 00 (origin: USA), and INC 15289. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your B00-18053 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for B00-18053

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part B00-18053, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number B00-18053 with NSN 5990-00-781-9423, 5990007819423

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-781-9423 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER	5990	007819423	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
B00-18053	C	2	5

Characteristics Data of NSN 5990-00-781-9423, 5990007819423

MRC	Criteria	Characteristic
AAFZ	BODY MATERIAL	STEEL,CORROSION RESISTING
AAVL	PILOT DIAMETER	0.9375 INCHES NOMINAL
ABKK	FLANGE DIAMETER	1.7500 INCHES NOMINAL
ABKU	FLANGE THICKNESS	0.0930 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.0780 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.1872 INCHES NOMINAL SINGLE SHAFT
ABXF	SHAFT LENGTH	0.5000 INCHES NOMINAL SINGLE SHAFT
AJSL	BODY SIZE	18
AJSQ	STATOR INPUT ELECTRICAL POWER RATING	25.0 MILLIWATTS NOMINAL
AJSW	ZRO RESISTANCE IN OHMS	320.00 NOMINAL
AJTS	ROTOR DC RESISTANCE IN OHMS	420.00 NOMINAL
AJVL	ELECTRICAL ERROR ANGULAR RANGE IN MINUTES	-6.0 TO 6.0
AJWQ	PILOT LENGTH	0.0400 INCHES NOMINAL
AJWR	SHOULDER LENGTH	0.0780 INCHES NOMINAL
CQTM	TERMINAL LOCATION	REAR
CRGZ	PLUS J ZSO REACTANCE IN OHMS	353.00 NOMINAL
CRSJ	SHAFT TYPE	ROUND,SLOTTED SINGLE SHAFT
TTQY	TERMINAL TYPE AND QUANTITY	5 WIRE LEAD
AAQL	BODY STYLE	STANDARD ROUND C
AAVH	SHOULDER DIAMETER	1.4370 INCHES NOMINAL
ABHP	OVERALL LENGTH	3.0600 INCHES NOMINAL
ABPA	UNDERCUT DIAMETER	1.6250 INCHES NOMINAL
AJSN	STATOR INPUT VOLTAGE RATING IN VOLTS	90.0 NOMINAL
AJSP	STATOR INPUT CURRENT RATING	7.0 MILLIAMPERES NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJSY	ZSO RESISTANCE IN OHMS	53.00 NOMINAL
AJTA	ZRS RESISTANCE IN OHMS	315.00 NOMINAL
AJTT	STATOR DC RESISTANCE IN OHMS	675.00 NOMINAL
AJVF	PHASE SHIFT ANGLE IN DEG	3.000 INPUT TO OUTPUT NOMINAL
AJVG	MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	30.00 INPUT
AJVH	MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT	45.00
AJVS	ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	16.0 CENTIMETER-GRAMS NOMINAL
AJVT	ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	6.0 CENTIMETER-GRAMS NOMINAL
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	2.3880 INCHES MAXIMUM
CQXQ	PLUS J ZRO REACTANCE IN OHMS	2030.00 NOMINAL
CRKL	PLUS J ZRS REACTANCE IN OHMS	225.00 NOMINAL
CSJY	TRANSFORMATION RATIO	0.735 ROTOR TO STATOR NOMINAL

Schedule B & Trade

End Use : 22220	Marine engines, parts
Schedule B : 9014900000 (NAICS 334511)	Parts & accessories for direction finding compasses and other navigational instruments and appliances
SITC : 87412	Parts and accessories of navigational instruments and appliances

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	062120 - Generators/motors/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)