We've received your request for VTRX37-6A1-96 (described as Synchro Receiver Tr), manufactured by General Dynamics Global Imaging with CAGE code 10112. This part is registered under NSN 5990-01-122-7130, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-122-7130, NCB code 01 (origin: USA), and INC 27218. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your VTRX37-6A1-96 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-01-122-7130 Item Description: Synchro Receiver Tr | 5990 | 011227130 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Vtrx37-6a1-96 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL, CORROSION RESISTING |
| AAVH | SHOULDER DIAMETER | 3.3290 INCHES MINIMUM AND 3.3340 INCHES MAXIMUM |
| AAZW | SECOND SHOULDER DIAMETER | 3.3740 INCHES MINIMUM AND 3.3750 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 5.9650 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.2450 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2403 INCHES MINIMUM SINGLE SHAFT AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| AGAV | END ITEM IDENTIFICATION | USED AS TORQUE RECEIVER TRANSMITTER ON RUDDER REPEATBACK ON 270 FT COAST GUARD VESSELS |
| AGRS | DISTANCE BETWEEN FLANGES | 1.8070 INCHES MINIMUM AND 1.8170 INCHES MAXIMUM |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 60.0 NOMINAL |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | 8.00 MINIMUM AND 10.00 MAXIMUM |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | 31.00 MINIMUM AND 35.00 MAXIMUM |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 35.00 OUTPUT |
| AJVM | SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -36.0/+36.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 0.900 INCH-OUNCES NOMINAL |
| AJWH | SHAFT END PLAY | 0.0010 INCHES MINIMUM AND 0.0050 INCHES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0250 NOMINAL MILS AND 0.0350 NOMINAL CENTIMETERS |
| AJWW | ERR DEFAULT | ERR DEFAULT AND ERR DEFAULT |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 4.0300 INCHES MAXIMUM |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQWQ | SHAFT THREAD LENGTH | 0.3100 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
| AAQL | BODY STYLE | STANDARD ROUND DOUBLE FLANGE A |
| AAVL | PILOT DIAMETER | 1.6200 INCHES MINIMUM AND 1.6300 INCHES MAXIMUM |
| AAZX | SECOND SHOULDER LENGTH | 0.3650 NOMINAL MILS AND 0.3850 NOMINAL CENTIMETERS |
| ABKK | FLANGE DIAMETER | 3.6240 INCHES MINIMUM AND 3.6250 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 3.6230 NOMINAL MILS AND 3.6250 NOMINAL CENTIMETERS |
| ABXF | SHAFT LENGTH | 0.6900 INCHES MINIMUM SINGLE SHAFT AND 0.7100 INCHES MAXIMUM SINGLE SHAFT |
| AHCG | MAXIMUM TEMP RISE | 35.0 DEG CELSIUS |
| AJSL | BODY SIZE | 37 |
| AJST | ROTOR INPUT CURRENT RATING | 830.0 MILLIAMPERES MAXIMUM |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 9.3 WATTS MICROWATTS |
| AJVF | PHASE SHIFT ANGLE IN DEG | 3.000 INPUT TO OUTPUT NOMINAL |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 200.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0/+10.0 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES NOMINAL |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| AJWR | SHOULDER LENGTH | 0.6500 NOMINAL MILS AND 0.6600 NOMINAL CENTIMETERS |
| AJWW | AFT OF SECOND FLANGE DIAMETER | 3.3850 INCHES MINIMUM AND 3.3900 INCHES MAXIMUM |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CSJY | TRANSFORMATION RATIO | 0.783 ROTOR TO STATOR NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 16.0 OUNCES |
| End Use : 22220 | Marine engines, parts |
|---|---|
| Schedule B : 9014900000 (NAICS 334511) | Parts & accessories for direction finding compasses and other navigational instruments and appliances |
| SITC : 87412 | Parts and accessories of navigational instruments and appliances |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| HMIC | N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| PMIC | A - Item does not contain precious metal. |
| AAC | C |
|---|---|
| Classification Control | U |
| MGMT_CTL | S-09--- |
| Quantity per pack | 1 |
| Repariability | If condemned or economically unserviceable, dispose by theoperator/crew |
| Shelf Life | N/A |
| SOS | Znc |
| Unit of Measure | Ea |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
