Buy 10009101 Control Alarm part by General Dynamics Land Systems Inc

Part Number: 10009101

Manufacturer: general dynamics land systems inc

NSN: 6350-01-542-9955

NIIN: 015429955

Item Name : control alarm

CAGE Code: 1EFH8

FSC: 6350 Miscellaneous Alarm Signal And Security Detection Systems

INC Code: 00910

Country: USA

NCB Code: 01

FSG: 63 Alarm Signal and Security Detection Systems

We've received your request for 10009101 (described as Control Alarm), manufactured by General Dynamics Land Systems Inc with CAGE code 1EFH8. This part is registered under NSN 6350-01-542-9955, classified in FSG 63 Alarm Signal and Security Detection Systems / FSC 6350 Miscellaneous Alarm Signal And Security Detection Systems. Our verification process will confirm traceability through supporting identifiers including NIIN 01-542-9955, NCB code 01 (origin: USA), and INC 00910. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 10009101 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 10009101

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 10009101, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6350-01-542-9955, 6350015429955

MRC	Criteria	Characteristic
AEEE	CONNECTOR MANUFACTURER CODE	11139
AEEF	CONNECTOR MANUFACTURER PART NUMBER	DT06-3S AND DTM04-3P
AFGA	OPERATING TEMP RANGE	-40.0 TO 257.0 DEG FAHRENHEIT
AGAV	III END ITEM IDENTIFICATION	2320-01-413-3739 TRUCK UTILITY
APXH	TERMINAL LOCATION	BOTTOM
ASXT	OPERATING RANGE	FIELD OF VIEW: 100 DEGREES SOLID CONE
AXGY	MOUNTING METHOD	BASE
CCFF	TERMINAL TYPE AND QUANTITY	1 CONNECTOR PLUG AND 1 CONNECTOR, RECEPTACLE
CHQP	MAXIMUM OVERALL LENGTH	3.500 INCHES
CHQQ	MAXIMUM OVERALL WIDTH	1.400 INCHES
CHQR	MAXIMUM OVERALL HEIGHT	8.000 INCHES
CKRD	SENSING ELEMENT TYPE AND LOCATION	INFRARED LIGHT INTERNAL
FEAT	SPECIAL FEATURES	OPERATING VOLTAGE: PROVIDED BY CONTROL MODULE; CURRENT DRAW: 5 MILLI-AMPS NOMINAL, 15 MILLI-AMPS ALARM (MAX); ENCLOSURE DESIGNED FOR NEMA 4X RATING; FIRE RESPONSE 25 MILLI-SECONDS (MAX) TO EXPLOSIVE FIRE; STATUS LAMP LATCHES GREEN BLINKING AFTER FIRE ALARM; POWER TO SENSOR MUST BE RECYCLED TO RESTORE NORMAL LAMP OPERATION.
SUPP	III SUPPLEMENTARY FEATURES	CAUTION: ENSURE MOUNTING LOCATION PROVIDES ADEQUATE CLEARANCE FOR MAINTENANCE AND TESTING (MINIMUM 4 INCHES IN FRONT).

Schedule B & Trade

End Use : 50030	Military trucks, armored vehicles, etc.
Schedule B : 8710000090 (NAICS 336992)	Parts of armored fighting vehicles, motorized, whether or not fitted with weapons
SITC : 89111	Tanks and other armored fighting vehicles, motorized, whether or not fitted with weapons, and parts of such vehicles

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD	A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	Q2200x-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	M - 85.0
NMFC:	012530 - Alarm/horn/signal sound warning
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	796 - Safety and rescue equipment