Buy 4014T61P01 Bracket Angle part by General Electric Company

Part Number: 4014T61P01

Manufacturer: general electric company

NSN: 5340-01-008-6911

NIIN: 010086911

Item Name : bracket angle

CAGE Code: 99207

FSC: 5340 Hardware Commercial

INC Code: 16900

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for 4014T61P01 (described as Bracket Angle), manufactured by General Electric Company with CAGE code 99207. This part is registered under NSN 5340-01-008-6911, classified in FSG 53 Hardware and Abrasives / FSC 5340 Hardware Commercial. Our verification process will confirm traceability through supporting identifiers including NIIN 01-008-6911, NCB code 01 (origin: USA), and INC 16900. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 4014T61P01 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4014T61P01

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 4014T61P01, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 4014T61P01 with NSN 5340-01-008-6911, 5340010086911

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-008-6911 Item PartTypeName: BRACKET,ANGLE	5340	010086911	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
4014T61P01	2	2	3

Characteristics Data of NSN 5340-01-008-6911, 5340010086911

MRC	Criteria	Characteristic
ADLK	FIRST LEG LENGTH	0.820 INCHES MINIMUM AND 0.860 INCHES MAXIMUM
ADLL	SECOND LEG LENGTH	2.326 INCHES NOMINAL
AHLF	SECOND LEG WIDTH	0.899 INCHES NOMINAL
AHLL	FIRST LEG SLOT LENGTH	0.400 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
AHLM	FIRST LEG SLOT WIDTH	0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
AHLS	SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH	1.556 INCHES MINIMUM AND 1.566 INCHES MAXIMUM
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.545 INCHES MINIMUM AND 0.555 INCHES MAXIMUM
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
AHLZ	SECOND LEG SLOT LENGTH	0.400 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
AHMA	SECOND LEG SLOT WIDTH	0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
AHPW	FIRST LEG THICKNESS	0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
AHPX	SECOND LEG THICKNESS	0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
AHQN	FIRST LEG WIDTH	0.680 INCHES NOMINAL
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
AJZU	FIRST LEG STYLE	SQUARE
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	ONE SLOT
AKBU	SECOND LEG STYLE	SQUARE
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	2 SLOTS
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL
MATT	MATERIAL	STEEL COMP 321
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE
STYL	STYLE DESIGNATOR	ANGLE

Schedule B & Trade

End Use : 41050	Cell phones and other household goods, n.E.C.
Schedule B : 8302500000 (NAICS 337127)	Hat-racks, hat pegs, brackets and similar fixtures, and parts thereof, of base metal
SITC : 69919	Mountings, fittings and similar articles, n.E.S., of base metal; hat racks and pegs, brackets, etc., of base metal; base metal automatic door closures

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	Q - 70.0
NMFC:	095190 - Hardware, noi sub 9
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware