Buy TJ236125 Circuit Breaker part by General Electric Company

Part Number:  TJ236125
Manufacturer:  general electric company
NIIN:  008375932
Item Name :  circuit breaker
CAGE Code:  60969
INC Code:  00136
Country:  USA
NCB Code:  00

We've received your request for TJ236125 (described as Circuit Breaker), manufactured by General Electric Company with CAGE code 60969. This part is registered under NSN 5925-00-837-5932, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-837-5932, NCB code 00 (origin: USA), and INC 00136. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your TJ236125 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for TJ236125

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part TJ236125, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 5925-00-837-5932, 5925008375932

MRCCriteriaCharacteristic
ADAQBODY LENGTH10.125 INCHES NOMINAL
ADTVCASE MATERIALPLASTIC
AEBPCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH9.125 INCHES NOMINAL
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.190 INCHES NOMINAL
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH2.750 INCHES NOMINAL
AJECBOSS HEIGHT0.219 INCHES NOMINAL
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE
CBBLFEATURES PROVIDEDADJUSTABLE TRIP RELEASE
CBMECUBIC MEASURE318.421 CUBIC INCHES
CPRFOPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS600.0 AC ALL LOCATIONS
CPRHCIRCUIT PROTECTION TYPEOVERCURRENT ALL LOCATIONS
CPRNULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT115.0 ALL LOCATIONS
CPRQRESET METHODMANUAL
CPRWACTUATOR FUNCTIONTRIP W/SEPARATE RESET
CPRXACTUATOR POSITION DESIGNATIONAT POLE TWO
CRCFTRIP RELEASE AMBIENT TEMP RATING25.0 DEG CELSIUS NOMINAL ALL LOCATIONS
FEATSPECIAL FEATURESMTG HOLES SPACED ON 8.000 IN. BY 2.000 IN. MTG CENTERS
PRMTPRECIOUS MATERIALSILVER
AAQLBODY STYLEMULTIPOLE-SINGLE ACTUATOR TYPE
ADATBODY WIDTH8.250 INCHES NOMINAL
ADAUBODY HEIGHT3.812 INCHES NOMINAL
AEBQCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH2.750 INCHES NOMINAL
AEBYDISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH7.250 INCHES NOMINAL
AFJNFRAGILITY FACTORMODERATELY RUGGED
AKPXPOLE QUANTITY3
APNQARC QUENCHING METHODDEION
BBRGSTORAGE TYPEGENERAL PURPOSE WAREHOUSE
CPLMMAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE125.0 AMPERES AC ALL LOCATIONS
CPRGMAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS15000.0 AC ALL LOCATIONS
CPRJTRIP RELEASE METHODTHERMAL-MAGNETIC ALL LOCATIONS
CPRLTRIP RELEASE CHARACTERISTICINSTANTANEOUS ALL LOCATIONS AND TIME DELAY ALL LOCATIONS
CPRRMAIN CONTACT TRIPPING MECHANISM TYPETRIP FREE
CPRTMANUAL ACTUATOR TYPE AND QUANTITY1 TOGGLE
CPSFADJUSTABLE TRIP SETTING CURRENT RANGE PER POLE IN AMPS+375.0/+1250.0 AC ALL LOCATIONS AND +375.0/+1250.0 DC ALL LOCATIONS
CQWNTRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT200.000 NOMINAL AT 125 PCT ALL LOCATIONS AND 18.000 NOMINAL AT 200 PCT ALL LOCATIONS AND 0.700 NOMINAL AT 300 PCT ALL LOCATIONS
FREQFREQUENCY IN HERTZ60.0 ALL LOCATIONS
TTQYTERMINAL TYPE AND QUANTITY6 SCREW

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536200040 (NAICS 335313) Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi
SITC : 77252 Automatic circuit breakers for a voltage not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC S - Item contains silver.

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top