Buy 451214 Cylinder Assembly H part by General Motors Corp

Part Number: 451214

Manufacturer: general motors corp

NSN: 2530-00-734-2546

NIIN: 007342546

Item Name : cylinder assembly h

CAGE Code: 73343

FSC: 2530 Vehicular Brake Steering Axle Wheel and Track Components

INC Code: 10862

Country: USA

NCB Code: 00

FSG: 25 Vehicular Equipment Components

We've received your request for 451214 (described as Cylinder Assembly H), manufactured by General Motors Corp with CAGE code 73343. This part is registered under NSN 2530-00-734-2546, classified in FSG 25 Vehicular Equipment Components / FSC 2530 Vehicular Brake Steering Axle Wheel and Track Components. Our verification process will confirm traceability through supporting identifiers including NIIN 00-734-2546, NCB code 00 (origin: USA), and INC 10862. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 451214 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 451214

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 451214, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 451214 with NSN 2530-00-734-2546, 2530007342546

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
2530-00-734-2546 Item PartTypeName: CYLINDER ASSEMBLY,HYDRAULIC BRAK	2530	007342546		P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
172-158	2	9	5

Characteristics Data of NSN 2530-00-734-2546, 2530007342546

MRC	Criteria	Characteristic
ABMK	OVERALL WIDTH	3.531 INCHES NOMINAL
ABXV	BORE DIAMETER	1.500 INCHES NOMINAL
ATEM	EXTENDED LENGTH	6.188 INCHES NOMINAL
ABDR	MOUNTING PROVISION	THREADED MOUNTING HOLES
ABKW	OVERALL HEIGHT	2.562 INCHES NOMINAL
AKBM	MOUNTING FACILITY THREAD CLASS	2B
AKBN	MOUNTING FACILITY THREAD DIRECTION	RIGHT-HAND
ASBP	BORE TYPE	STRAIGHT
BBBW	MOUNTING PROVISION ARRANGEMENT STYLE	TWO HOLE
CBBL	FEATURES PROVIDED	SERRATED ADJUSTER
CDTD	MOUNTING FACILITY THREAD SERIES DESIGNATOR	UNC
CDTF	MOUNTING FACILITY THREAD DIAMETER	0.312 INCHES NOMINAL
CDTG	MOUNTING FACILITY THREAD QUANTITY PER INCH	18
CKSD	DESIGN CHARACTERISTICS	DOUBLE ACTING SINGLE CYLINDER
CKSF	FIRST PISTON ROD END STYLE	SLOT TYPE ALL WORKING ENDS
CLLP	PISTON ROD END SIMILARITY	IDENTICAL
CLMD	FIRST END FORK WIDTH	0.688 INCHES NOMINAL ALL WORKING ENDS
CLMG	FIRST END FORK DEPTH	0.250 INCHES NOMINAL ALL WORKING ENDS
CLMJ	FIRST END FORK SPAN WIDTH	0.250 INCHES NOMINAL ALL WORKING ENDS
CLML	MOUNTING TYPE AND LOCATION	FLANGE CENTER SECTION
CLMN	MOUNTING FACILITY THREAD LENGTH	0.375 INCHES NOMINAL
CLMS	PORT LOCATION AND QUANTITY	1 CENTER SECTION
CLMT	PORT STYLE	GASKET SEAL SINGLE PORT
CLMW	PORT THREAD SERIES DESIGNATOR	UNF SINGLE PORT
CLMX	PORT THREAD DIAMETER	0.438 INCHES NOMINAL SINGLE PORT
CLMY	PORT THREAD QUANTITY PER INCH	20 SINGLE PORT
CLNB	PORT THREAD CLASS	2B SINGLE PORT
CLND	BLEEDING FEATURE QUANTITY	1

Schedule B & Trade

End Use : 30230	Other parts and accessories of vehicles
Schedule B : 8708300050 (NAICS 336340)	Brakes and servo-brakes and parts, of motor vehicles of headings 8701 to 8705
SITC : 78433	Brakes and servo-brakes and parts thereof for tractors, motor cars and other motor vehicles, etc.

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	V
Classification Control	U
MGMT_CTL	9c-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	S9c
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	133300 - Machinery/machines noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	885 - Vehicles, mhe, road construction, repair parts and components