Buy 1952006 Pulley Groove part by General Motors Corp

Part Number: 1952006

Manufacturer: general motors corp

NSN: 3020-00-852-1193

NIIN: 008521193

Item Name : pulley groove

CAGE Code: 61928

FSC: 3020 Gears Pulleys Sprockets and Transmission Chain

INC Code: 08109

Country: USA

NCB Code: 00

FSG: 30 Mechanical Power Transmission Equipment

We've received your request for 1952006 (described as Pulley Groove), manufactured by General Motors Corp with CAGE code 61928. This part is registered under NSN 3020-00-852-1193, classified in FSG 30 Mechanical Power Transmission Equipment / FSC 3020 Gears Pulleys Sprockets and Transmission Chain. Our verification process will confirm traceability through supporting identifiers including NIIN 00-852-1193, NCB code 00 (origin: USA), and INC 08109. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 1952006 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 1952006

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 1952006, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 1952006 with NSN 3020-00-852-1193, 3020008521193

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3020-00-852-1193 Item PartTypeName: PULLEY,GROOVE	3020	008521193		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1952006	C	1	C			9

Characteristics Data of NSN 3020-00-852-1193, 3020008521193

MRC	Criteria	Characteristic
AAUJ	SPLINE MAJOR DIAMETER	0.874 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
ABGA	GROOVE DEPTH	0.630 INCHES NOMINAL
ABHE	OUTSIDE DIAMETER	4.180 INCHES NOMINAL
ABSC	SPLINE MINOR DIAMETER	0.763 INCHES MINIMUM AND 0.765 INCHES MAXIMUM
AGGS	V GROOVE ANGLE IN DEG	36.0
ARJD	DESIGN FORM	WEBBED
ASBP	BORE TYPE	INVOLUTE SPLINE
AXFH	SPLINE LENGTH	2.000 INCHES NOMINAL
BSYG	SPLIT HUB FEATURE	NOT INCLUDED
BXSH	WEB/SPOKE RELATIONSHIP TO FACE CENTERLINE	OFFSET
BXSK	INTEGRAL COOLING VANE	INCLUDED
BYDZ	PROTRUDING HUB CHARACTERISTIC	PLAIN
BYZD	HUB END OUTSIDE DIAMETER AND LOCATION	1.338 INCHES NOMINAL AA END AND 1.250 INCHES NOMINAL BB END
STYL	STYLE DESIGNATOR	WEBBED OR SPOKED
ABGF	GROOVE WIDTH	0.680 INCHES NOMINAL
ABHP	OVERALL LENGTH	2.240 INCHES NOMINAL
ABSA	SPLINE QUANTITY	13
AGJS	PITCH DIAMETER	2.920 INCHES NOMINAL
AQPL	FACE WIDTH	1.650 INCHES NOMINAL
AWJQ	BEARINGS	NOT INCLUDED
AXFG	SPLINE PRESSURE ANGLE IN DEG	30.0
AXHQ	GROOVE QUANTITY	2
AXND	COUNTERBORE FEATURE	NOT INCLUDED
BDTX	SPLINE PITCH DIAMETER	0.8120 INCHES NOMINAL
BXSJ	LIGHTENING HOLE	NOT INCLUDED
BXSM	GROOVE SHAPE	V
BYDS	BORE FEATURE	INCLUDED
BYZF	DISTANCE FROM OUTSIDE FLANGE/RIM TO HUB END AND LOCATION	0.316 INCHES NOMINAL AA END AND 0.240 INCHES NOMINAL BB END

Schedule B & Trade

End Use : 21180	Industrial machines, other
Schedule B : 8487900080 (NAICS 333999)	Machinery parts not containing electrical features, and not specified or included elsewhere in chapter 84, except ships propellers
SITC : 74999	Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features, n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	12c2b--
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	S9c
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	S - 60.0
NMFC:	127300 - Pulley blocks/tckle/snatch/fairldrs
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)