We've received your request for 6719099 (described as Clamp Loop), manufactured by General Motors Corp with CAGE code 24617. This part is registered under NSN 5340-00-522-9179, classified in FSG 53 Hardware and Abrasives / FSC 5340 Hardware Commercial. Our verification process will confirm traceability through supporting identifiers including NIIN 00-522-9179, NCB code 00 (origin: USA), and INC 17532. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 6719099 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-522-9179 Item PartTypeName: CLAMP,LOOP | 5340 | 005229179 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 6719099 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT AND OIL RESISTANT |
| ABMK | OVERALL WIDTH | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| ABMZ | DIAMETER | 0.194 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.051 INCHES NOMINAL |
| AHMM | LUG WIDTH | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.703 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 0.146 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| AZDE | CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE | 0.907 INCHES MINIMUM AND 0.969 INCHES MAXIMUM |
| BZTN | LOOP INSIDE DIAMETER | 0.594 INCHES MINIMUM AND 0.655 INCHES MAXIMUM |
| BZTP | DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER | 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| BZTQ | LUG HOLE DIAMETER | 0.252 INCHES MINIMUM AND 0.262 INCHES MAXIMUM |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 BAND |
| MATT | MATERIAL | ALUMINUM BONDING STRIP |
| MATT | MATERIAL | RUBBER SYNTHETIC CUSHION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND |
| SFTT | SURFACE TREATMENT | ANODIZE BAND |
| STYL | STYLE DESIGNATOR | RIGHT HAND CLAMP & BRACKET |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | V |
|---|---|
| Classification Control | U |
| MGMT_CTL | Sf9sx-n |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | J - 100.0 |
| NMFC: | 013120 - Aluminum article noi sub 6 |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
