Buy 9S30-02-1-8N Switch Rotary part by Grayhill Inc

Part Number:  9S30-02-1-8N
Alternate P/N:  9S300218N
Manufacturer:  grayhill inc
NIIN:  012108431
Item Name :  switch rotary
CAGE Code:  81073
INC Code:  02134
Country:  USA
NCB Code:  01

We've received your request for 9S30-02-1-8N (described as Switch Rotary), manufactured by Grayhill Inc with CAGE code 81073. This part is registered under NSN 5930-01-210-8431, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-210-8431, NCB code 01 (origin: USA), and INC 02134. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 9S30-02-1-8N requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 9S30-02-1-8N

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 9S30-02-1-8N, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 9S30-02-1-8N with NSN 5930-01-210-8431, 5930012108431

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-01-210-8431

Item PartTypeName:

SWITCH,ROTARY

5930012108431P
CIICHCCESDPMICCriticalityENAC
A
Part NumberISCRNVCRNCCHCCMSDSSADC
46-031998-0151CA

Characteristics Data of NSN 5930-01-210-8431, 5930012108431

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2A SINGLE MOUNTING FACILITY
AASATHREAD LENGTH0.312 INCHES NOMINAL SINGLE MOUNTING FACILITY
ABFEHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTIONEXPLOSION PROOF
ABHPOVERALL LENGTH1.965 INCHES NOMINAL
ABNBFIRST FLAT LENGTH0.250 INCHES NOMINAL SINGLE ACTUATOR
ABNCFLAT HEIGHT0.094 INCHES NOMINAL SINGLE ACTUATOR
ABWVSHAFT DIAMETER0.125 INCHES NOMINAL SINGLE ACTUATOR
ABXFSHAFT LENGTH0.375 INCHES NOMINAL SINGLE ACTUATOR
ADAVOVERALL DIAMETER0.670 INCHES MINIMUM AND 0.800 INCHES MAXIMUM
AFBHINDIVIDUAL SECTION QUANTITY2
AJZESWITCH CONTACT BASIC DESIGNNONPILE-UP SYMMETRICAL
AKPXPOLE QUANTITY1 EACH SECTION FRONT
AKPYTHROW QUANTITY8 EACH SECTION FRONT
AXGYMOUNTING METHODTHREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY
CQJXNOMINAL THREAD SIZE0.250 INCHES SINGLE MOUNTING FACILITY
CQMKCONTACT VOLTAGE RATING IN VOLTS115.0 AC AT SEA LEVEL
CQMKCONTACT VOLTAGE RATING IN VOLTS28.0 DC AT SEA LEVEL
CQTHROTOR THROUGH CONNECTION QUANTITY2 EACH SECTION
CRJHSWITCH ACTUATOR INDEXING POSITION QUANTITY8 SINGLE ACTUATOR
CRSJSHAFT TYPEROUND,FLATTED SINGLE ACTUATOR
CSCFTERMINAL TYPETAB,SOLDER LUG
CSHWCONTACT SWITCHING ACTIONBREAKS BEFORE MAKES EACH SECTION REAR
CSLCSWITCH ACTUATOR POSITIONING INCREMENT30.0 DEGREES SINGLE ACTUATOR
CTDNSWITCH ACTUATOR STOP DEVICE TYPEFIXED STOP SINGLE ACTUATOR
CTHFCONTACT LOAD CURRENT RATING125.0 MILLIAMPERES RESISTIVE LOAD AND 50.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL
CTHFCONTACT LOAD CURRENT RATING75.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL
STYLSTYLE DESIGNATORTAP,CIRCULAR,BUSHING MOUNT
TESTTEST DATA DOCUMENT81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTIN
THSDTHREAD SERIES DESIGNATORUNEF SINGLE MOUNTING FACILITY
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-S-3786/13 GOVERNMENT SPECIFICATION

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536509020 (NAICS 335931) Switches, rotary, rated at not over 5 a, for a voltage not exceeding 1, 000 v
SITC : 77255 Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL 9n-----
Quantity per pack No qup
Repariability
Shelf Life N/A
SOS S9e
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Complete Aerospace and NSN Parts Purchasing Platform

asach

AS9120B and ISO 9001:2015

asap_member

Aviation Suppliers Association Member

certified_company

FAA AC 0056B Accredited

as6081_supplier

AS 6081:2012 Certification

esd_association

ESD S20.20-2014 Certification

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top